UV DTF PEN WRAP Create a custom pen in minutes with our premium UV DTF Pen Wraps! These ready-to-apply transfers feature vibrant, detailed designs with no heat press, weeding, layering, or special equipment required. Each wrap is designed for compatible smooth, straight-sided pen blanks. Because pen dimensions and blank styles can vary slightly between manufacturers, minor trimming or adjustment may be necessary before application. PRODUCT DETAILS Includes ONE (1) UV DTF pen wrap Designed for compatible smooth pen blanks Premium full-color UV DTF print Strong permanent adhesive No heat press required No weeding or layering Easy peel-and-apply application Pen blank is NOT included HOW TO APPLY Make sure the pen blank is completely clean, dry, and free of oils, dust, or fingerprints. Before removing the backing, position the wrap around the pen to check placement and fit. Trim if necessary. Carefully remove the backing from the transfer. Align the wrap before allowing the adhesive to make full contact. UV DTF adhesive is very strong and cannot easily be repositioned once applied. Slowly roll the wrap onto the pen, smoothing it as you go to minimize bubbles and wrinkles. Firmly rub over the entire design to ensure good adhesion. Slowly peel away the clear carrier film. If any portion of the design begins to lift, lay the film back down, rub firmly, and continue peeling slowly. PLEASE NOTE Due to differences between pen blank manufacturers, exact fit may vary slightly. Always check the wrap against your pen blank before application. UV DTF transfers use a strong permanent adhesive. Please take your time during placement and application. Creations With Purpose is not responsible for transfers damaged due to incorrect application, placement, or improper care. Colors may vary slightly due to differences in monitors, screens, and the finished surface.
