Mahogany body V1 guitar kit with ebony fretboard, mahogany bolt-on neck, and abalone dot fretboard inlays. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (5/10) Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right Mahogany has open grain that needs filling before finishing for a smooth result Adjustable bridge sets intonation quickly once the posts are seated Body Material: Mahogany Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75″ Binding: None Fretboard Material: Ebony Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone, 3-Way Wiring: DIY (soldering required) Wiring Diagram: HH, 1 Volume, 1 Tone, 3-Way Switch Output Jack: Top jack Hardware Bridge: Adjustable Bridge + Stopbar Tuners: Closed Pickguard: Black Knobs: Black Cavity Covers: Black Strings: Steel Finish: Chrome Tremolo Arm: None What's in the Box V-shaped guitar body (unfinished) Guitar neck with dark fretboard and round shell dot inlays 6x chrome sealed tuners with bushings and washers 2x humbucker pickups with black covers Chrome bridge with six adjustable saddles Chrome stop tailpiece 4x mounting posts for the bridge and tailpiece Wiring harness with potentiometers, wires and a toggle switch with a ivory tip Round black jack plate with output jack fitted Chrome neck plate with four long mounting screws Black truss rod cover with screws Black pickguard 2x black dome knobs 2x strap buttons with screws Coil of wire Allen wrench Assorted screws Black instrument cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related