This 2x1' vacuum table was made just for the Shapeoko 5.1 Pro. These tables are ultimately consumable, because mistakes will happen, and they might get gouged. If that happens, you can repair them with a bit of JB weld and a file, instead of having to replace the table itself. You'll need to pair this vacuum table with a vacuum pump to use it. What's included: 1x Vacuum table (24" x 12") 5x meters of 8mm Vacuum hose 5 meters of 5x5mm gasket 1x 8mm Hose fitting 1x Plug for the second air port Compatibility: Shapeoko 5.1 Pro Shapeoko 5 Pro The vacuum tables are 20mm thick, and are designed to mount to the T-slots in the Hybrid Table. Depending on your applications, you might need to add a sacrificial layer on top of the vacuum table to protect it from gouging. We recommend using MDF for this. NOTE: Our vacuum tables have a matte finish for additional friction and grip to reduce the chances of your workpiece slipping. Because of this finish, the tables will pick up a patina over time as you touch them with your hands, or get other oils on this. This is normal and does not affect the performance of the table. A PDF Drawing of the Vacuum Table is available here
