The easy35 APS holder allows you to scan APS film that is 24mm wide and has a frame size of 30.2x16.9mm (APS-H format) or less. The holders fits into the easy35 system just like any other compatible holder - by sliding out the existing holder and sliding in this new holder. The gate dimensions are approximately: Length 33.2mm Width 21.4mm allowing you to see the whole frame and the some of the rebate area around. In use VALOI easy35 holders work by passing the film through a thin slit passing through the whole holder and out on the other side. This way, you can conveniently push or pull the film through all the way, saving you time and effort compared to a traditional clam shell holder. All VALOI holders employ a double-S curve design, where the slit that the film is passed through curves before and after the scanning gate. By bending the film slightly in one direction on both sides of the film, greater flatness is achieved than would be possible with a straight slit. Compatibility It is compatible with all easy35 units. The holder is conveniently replaced by releasing a single screw screw and pushing the original holder out, and the new one in. This holder is not compatible with the VALOI 360 system.
