Ensure FDNY compliance with this “This Valve Controls Supply to Automatic Sprinklers and Standpipe” sign. Required for identifying critical fire protection system valves, this sign helps emergency responders quickly locate and operate sprinkler and standpipe controls, improving safety, response time, and overall building code compliance in NYC properties. Dimensions: 7" x 10" Materials: .02in Reflective Aluminum What This Sign is For: This sign identifies a control valve that regulates the water supply to both the automatic sprinkler system and standpipe system within a building. It ensures that maintenance personnel and FDNY responders can quickly determine the function of the valve during inspections, testing, or emergency situations. Legal Requirement Explained: Under the NYC Fire Code (FC §901, §903, §905) and applicable NFPA standards (NFPA 13 & NFPA 14), fire protection system components must be clearly identified with permanent signage.Valves controlling water supply to critical life safety systems must be labeled so that first responders can immediately identify and operate the correct valve without confusion or delay, especially during fire suppression operations. Who is Required to Post This Sign: - Buildings with combined sprinkler and standpipe systems- Commercial properties- High-rise buildings- Multifamily residential buildings with fire protection systems- Any structure where a single valve controls both systems Where We Recommend This Sign Be Posted: - Directly at or immediately adjacent to the control valve- On a wall, pipe, or mounting surface clearly associated with the valve- Inside fire riser rooms, mechanical rooms, or sprinkler control areas- In a location that is clearly visible upon approach to the valve Unacceptable Locations to Post This Sign: - Mounted away from the valve or in a separate room- Hidden behind pipes, equipment, or storage- Placed on doors that may be closed, obscuring visibility- Installed in poorly lit or obstructed areas- Positioned where it does not clearly indicate which valve it refers to- Temporary, loose, or non-durable placements Recommended Height / Installation Requirements: - Install at eye level (typically 48”–60” above finished floor)- Must be permanently affixed (no temporary signage)- Use durable, weather-resistant materials if exposed- Maintain high contrast lettering for readability- Ensure sign is clearly legible from a reasonable distance- Do not obstruct with piping, equipment, or building elements Disclaimer: This information is provided for general guidance only and may not reflect all current codes or project-specific requirements. Always consult the NYC Fire Code, applicable NFPA standards, and a licensed professional or Authority Having Jurisdiction (AHJ) for full compliance.
Related
Related
Related
Related