van den Hul DIY SPADE 4 kpl setti vdHul haarukkaliittimiä kaiutinkaapeliliitoksiin DIY SCREW-ON SPEAKER CONNECTORS Versatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away. 24 carat gold plated, screw-on, solderless connectors Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance. The high pressure clamping ensures low loss electrical connection and maximum signal transfer Banana terminal (standard Ø4 mm pin) Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm. Easy assembly instructions (4 steps): Strip off 14mm of the multi-strand cable/wire jacket Insert the stripped end through the screw-on collar Fan out the strands and evenly fold them encircling the collar Insert the banana pin/spade blade and screw-on to the collar These connectors fit the following cables and wires: The CLEARTRACK CS - 12 HF The CLEARWATER CS - 14 HYBRID D – 352 HYBRID CS – 14 The GOLDWATER CS – 16 The INSPIRATION HYBRID CS - 122 HYBRID The SKYLINE HYBRID SCS - 16 The SNOWLINE SCS - 18 The TEATRACK HYBRID The TWIN The WIND Mk II HYBRID TIP: Try our special contact fluid The SOLUTION on the strands before mounting the banana pin/spade blade part.
