VBF-1200X-YG is a top-loading furnace featuring three-sided heating with a maximum operational temperature of 1200 °C. It is specially designed for solid oxide fuel cell (SOFC) stack testing and accommodates specimens up to 300mm in width and 200mm in height. This furnace comes with two non-heated side panels to allow customized drilling to support experimental operations. With its energy-efficient heating design, the furnace is suited for the traditonal thermal processing and research application. Specification: Feature High-purity alumina fiber insulation minimizes heat loss and maximizes thermal efficiency. Chamber surfaces are coated with alumina to enhance heating efficiency and extend service life. Equipped over-temperature and broken thermocouple protection ensures safe operation. Heating elements are arranged on the top, front, and rear walls for uniform thermal distribution. Side panels are insulated without heating elements to allow user customization through drilling. Power Requirement AC220V ± 10%, Single Phase, 50/60 Hz Work Output 7KW Heating Chamber Heating Chamber Dimensions: 300mm x 300mm x 200mm (L x W x H) Top Heating Chamber: 300mm x 300mm x 50mm (L x W x H) Lower Heating Chamber: 300mm x 300mm x 150mm (L x W x H) Working Temperature Continuous Working Temperature: 0-1100 °C Max. Working Temperature: 1200 °C, < 30min Heating Rate 20 °C/min, Max. Recommended Heating Rate: 10 °C/min Heating Element Fe-Cr-Al doped by Mo Thermocouple K-Type Thermocouple Temperature Control An NRTL-certified diginal temperature controller is included Proportional-integral-derivative (PID) control and auto-tune function 30 programmable segments with heating, cooling, and dwelling steps Built-in over-temperature and thermocouple failure alarm ± 1°C temperature accuracy Eurotherm Temperature Controller is available upon request at an extra cost with ±0.1 °C accuracy Compaliance CE Certified NRTL or CSA certification is available upon request at an extra cost Application Notes Keep the device away from flammable, explosive, and toxic gases. Minor cracks of the insulation material may occur after prolonged use. This is normal, repairable, and does not affect performance Do not open the furnace chamber when the temperature is above 500 °C
Related
Related
Related
Related