Product description The VDTU2A is a VDSL2 bridge modem equipped with an RJ45 POTS interface and an RJ45 10/100 Mbps Ethernet port. The VDTU2A is extremely flexible, working in both symmetric and asymmetric connection modes and adjusting for maximum performance over the copper lines it operates. The maximum throughput is 100/75 Mbps asymmetrical (* - subject to certain conditions of the environment like 24 AWG and low EMI) and still offering a stunning 10Mbps duplex on distances up to 1Km. The extra benefit of VDTU2A is the ability to fit into the FMC chassis, together with all other FMC media converters. Using the VDTU2A VDSL2 LAN Extender, both fiber and copper communications can be aggregated in same rack mountable chassis. The VDSL2 bridge can be set as CPE or CO operating mode via the front panel DIP switches, a single model can be used in both locations with appropriate settings. The target data rate and SNR margin can also be set on fixed levels by user. Technical specifications Interfaces: RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX compliant and RJ-45 VDSL2 DMT port VDSL2 port: DMT, ITU-T G993.1/G993.2 compliant, on-board surge protection Operating distance: up to 1.5Km on AWG 26 copper wire Front LEDs: PWR, CO/CPE, Idle/Link, TP Act/Link, Duplex, 10/100 Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug Consumption: 4.2 Watt maximum Temperature: 0 5°C (Operating); 0 7°C (Storage) Humidity: 20 80% non condensing (Operating); 0 90% (Storage) Dimensions(WxDxH): 73mm x 108mm x 23mm MTBF: 65,000 hours Product Sheet: Data Sheet Installation Manual
