Description NOTE: These kits are assembled in-house and may show as BACK ORDERED even when in stock. To confirm stock before ordering, please email. [email protected] Operations in multistory buildings can pose the risk of a barricaded or obstructed exit. Historically there have been circumstances of ambushes on teams where all avenues of exit from the building are blocked and the building was detonated before the team was able to safely escape. It’s also feasible that escape from high to lower floors could be obstructed by fire, structural collapse, escaping crowds, or any number of other variables. While these occurrences are typically rare, survival can be at stake. The VECTOR Kit was designed to be so small, lightweight, and unobtrusive, that you would not even know you are carrying it. Yet it provides a critical egress capability from an urban elevated position that would otherwise be dangerous or impossible to conduct. The kit allows rapid anchorage of the rope into wood frame, cinder, plaster, etc. construction. The stock 20m rope should allow egress from up to the fifth floor depending on floor heights and interior depth of the anchor. Longer lengths may be possible for special circumstances. The descent control device will provide a controlled descent with up to 265 lbs. working load. Kit Contents 1 x GP POUCH [Made in USA], (MultiCam)1 x FireFly™ IPLD DEVICE1 x FireFly™ 3.8 MM ROPE (20M OR 46M)1 x CTOMS MEAT HOOK1 x QUICK LINK1 x DMM PHANTOM HMS SCREW GATE1 x ROPE BAG 1 x 1” TUBULAR NYLON EDGE PROTECTION SLEEVE1 x CARRIER POUCH W/ 2 x MALICE CLIPS Specifications Weights & Dimensions Dimensions: 11cm W x 16cm H x 6.5cm Volume: 1287cm3 (70in3) Weight: Total Paraglider Kit with 20m Rope: 600g (1.35 LBS) Documentation FireFly Urban Egress Spec Sheet FireFly CE Certification
