VeEX | PART #Z06-00-013P FX40 Optical Light Source (1310/1550) DESCRIPTION LIGHT SOURCE (Not a Power Meter!) Fiberizer® software for Windows® Desktop, Android™, and/or Apple® mobile devices is available to assist in data transfer, record management, and report generation for various VeEX fiber optics testers. View the Fiberizer webpage for more details INCLUDES FX40 Optical Light Source, with Alkaline Battery support Carrying Pouch for V40 Quick Reference Guide, FX40, Getting Started Guide, Applicable to FX45/FX48 1-Year Standard Warranty from initial purchase FEATURES Singlemode and Multimode testing Built-in universal 2.5 mm tip sleeve PON, Telecom, CATV and LAN/WAN applications Dual wavelength laser source and power meter options High accuracy and wide dynamic range Save OPM measurements (>100 single results) Transfer stored results to a PC or upload results to Fiberizer Cloud via micro USB interface for report generation and printing Reference power level setup and recall Splash resistant keypad and chassis design High contrast display - Visible outdoors and backlight for indoor or low light conditions Alkaline or Rechargeable battery option with Auto power off Field interchangeable optical adaptors support multiple connector types and allow easy access for cleaning FX40 OPTICAL LIGHT SOURCE DATASHEET SPECIFICATIONS Optical Light Source (OLS) 3 Wavelengths: 1310/1490 nm or 1310/1550 nm or 850/1300 nm to OLS wavelengths Test Tone Generation: 270, 1 kHz, 2 kHz Stability: ±0.03 dB for insertion loss measurements Visual Fault Locator (VFL) 4 Wavelength: 650 nm Connectory style: Universal 2.5 mm Mode: CW or 2 Hz Power Output: 1 mW Laser Safety: Class 2 General Results saving: 100 without timestamp OPM Remote control data transfer using LT-Sync PC software Communication port: micro USB OLS/OPM adaptor types: FC/SC/ST/LC/E2000, Universal 1.25 mm, Universal 2.5 mm Battery: Alkaline (AA) or Optional NiMH with 5V micro-USB power adaptor Battery operating time: approximately 100 hours (without backlight) Notes:1. PM1: SM ±5% at -50 to +7 dBm; ±10% -65 to -50 dBm; MM ±8% at -50 to +7, ±13% at -65 to -50 dBm. Applies only with OPM fitted with SC or FC adaptor.2. PM2: SM ±5% at -35 to +25 dBm; ±10% -50 to -35 dBm; MM ±8% at -35 to +25 dBm; ±13% -50 to -35 dBm. Applies only with OPM fitted with SC or FC adaptor.3. FX40 can support a maximum of two configurations: OLS/VFL or OPM/VFL4. Limited to certain configurations Common Questions About the VeEX FX40 Optical Light Source What is the VeEX FX40 used for?The VeEX FX40 is an optical light source used for insertion loss testing, fiber certification, and troubleshooting when paired with a compatible optical power meter. Is the FX40 a power meter?No. The FX40 is a light source only. It generates stable optical signals but does not measure power levels on its own. A separate optical power meter is required for loss measurements. Who uses the FX40 optical light source?The FX40 is commonly used by fiber technicians, installers, and network engineers performing fiber testing on PON, telecom, CATV, and LAN or WAN networks. How the FX40 Supports Accurate Fiber Loss Testing The VeEX FX40 Optical Light Source provides stable dual wavelength output for reliable insertion loss testing across singlemode and multimode fiber networks. When paired with a compatible power meter, it allows technicians to accurately verify fiber performance, document results, and generate reports during installation and maintenance. At a Glance • Optical light source for fiber certification and loss testing• Used with an optical power meter, not a standalone tester• Supports singlemode and multimode fiber applications• Designed for PON, telecom, CATV, and LAN or WAN networks• Rugged handheld design with long battery life
