Description The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market. The Vektor front stabilizer begins at an outer diameter of 0.63" and sleekly transitions down to a 0.5" outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56" to 0.5" taper. Features -VIBRO-Core Internal Damping – remove unwanted vibration from your shot.-C-Spine – 450-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.-5/16-24 threads on both proximal and distal endcap.-Aerospace grade aluminum proximal and distal endcaps.-Flat slots in proximal endcap for tightening with a wide range of common tools.-30″ Vektor with standard VIBRO-Core weighs 5.7 oz and with Tungsten Damping weighs 8.8 oz Optional Features Steve Wijler Edition Tungsten Damping Powder – adds 3 oz of tungsten powder to the distal end of the stabilizer to add internal weight and significant vibration reduction (VIBRO-Core internal damping is still included).As with all our products, the Vektor works perfectly with both compound and recurve. The recommended weight ranges for the front stabilizer are 1-6 oz for crisp feel, 6-25 oz for ideal feel, 25+ for softer feel. This recommended weight range does not account for dampers or decouplers – mass weight that the stabilizer can handle increases when using dampers between weights or between the stabilizer and the weights. Side rods can handle roughly double the mass weight for similar reactions.
