Product Story The Vektor 2 is the evolution of one of the most versatile stabilizers ever built. When the original Vektor launched, it introduced a rare balance of wind efficiency and stiffness that worked exceptionally well for both compound and recurve archers. It quickly became a favorite among athletes who wanted a stabilizer that could perform reliably in real outdoor conditions. Over the past decade we have continued refining our approach to stabilization through extensive testing, prototype development, and feedback from elite competitors around the world. The Vektor 2 brings those lessons together in a completely redesigned stabilizer. The profile has been updated with a refined Wind Taper geometry, increasing the base diameter while maintaining a narrow tip. This keeps the excellent wind efficiency of the original Vektor while improving stiffness, vibration reduction, and overall shot reaction. The result is a stabilizer that reduces tip flutter and creates a more confident aiming picture. We also redesigned the end caps to increase structural strength at the base while minimizing mass at the tip. This raises the natural frequency of the stabilizer and improves responsiveness during aiming corrections. The result is a stabilizer that holds steadier, reacts cleaner after the shot, and performs reliably in real outdoor conditions. If you loved the original Vektor, the Vektor 2 will feel familiar while delivering a noticeable improvement in stability and response. Technical Specifications Carbon Construction Ultra high modulus carbon fiber layup Diameter Front stabilizers0.60” base tapering to 0.53” tip Side stabilizers0.57” base tapering to 0.53” tip The Wind Taper profile increases stiffness where the stabilizer experiences the most stress while reducing drag at the tip where wind torque is greatest. This geometry also improves vibration reduction compared to a parallel carbon tube. Stiffness C-Spine: 440 Recommended weight rangeFront stabilizer: 3–20 ozSide stabilizer: 3–30 oz The Vektor 2 sits between the Ultra and Beast in overall stiffness, making it one of the most versatile stabilizers in the RamRods lineup. An optional Vektor 2 S version measures 380 C-Spine, providing over 13% additional stiffness for compound athletes who run heavier weight systems. Side rods are not offered in the S version because shorter stabilizers already provide high stiffness and the performance gain does not justify the additional cost. End Caps EDGE aerospace grade aluminum The redesigned end caps maximize strength at the base of the stabilizer while minimizing weight at the tip. This increases natural frequency and improves aiming responsiveness. A deeper overlap between carbon and aluminum also increases durability. Threads 5/16-24 threaded ends Compatible with standard stabilizer weights, dampers, and conversion screws. Stabilizer Mass (without weights) 10” – 2.2 oz11” – 2.4 oz12” – 2.5 oz13” – 2.6 oz14” – 2.7 oz15” – 2.9 oz 26” – 4.4 oz27” – 4.5 oz28” – 4.7 oz29” – 4.8 oz30” – 4.9 oz32” – 5.2 oz Tungsten VIBRO-Core option adds 2 oz Note: Stabilizer lengths are measured from end cap to end cap and do not include additional hardware, weights, or dampers. Who It's For The Vektor 2 sits in the center of the RamRods premium stabilizer lineup. It balances stiffness and wind efficiency, making it one of the most versatile high performance stabilizers we produce. It is slightly stiffer but a bit less wind efficient than the Ultra 4, and slightly more wind efficient but less stiff than the Beast. Because of this balance, the Vektor 2 works well for a wide range of archers across both compound and recurve. Compound Archers The Vektor 2 is typically the best fit if you: • Prioritize wind efficiency for outdoor competition• Run roughly 25 oz or less on your front stabilizer• Prefer a stabilizer that feels stable but not extremely rigid If you run very heavy weight stacks or prefer maximum stiffness, the Beast may be a better fit. Recurve Archers The Vektor 2 is a great option if you: • Run 10 oz or more on your front stabilizer• Prefer a crisp shot reaction and stable hold• Want more stiffness than the Ultra line while maintaining strong wind performance If maximum wind efficiency is your top priority, the Ultra 4 may be the better choice. Still not sure which stabilizer fits you best?Take our Stabilizer Selection Quiz or send us a message and we will help you build the perfect setup. Goes Well With If you are setting up a Vektor 2 system, the right accessories will help you get the most performance from your stabilizers. The Vektor 2 was designed to work in harmony with our line of EDGE accessories. When paired together, these components create a fully integrated stabilization system that improves structural rigidity, tuning flexibility, and overall shot reaction. The EDGE design language also creates a clean, unified aesthetic across the entire setup, making your bow look as refined as it performs. Recurve Setup For a recurve bow we recommend pairing the Vektor 2 with: • EDGE Extension (carbon or aluminum)• EDGE Adjustable V-Bar• EDGE Small QDC for quick setup and repeatable alignment• EQ Dampers (trio set) in 40 or 50 stiffness• 4-2-1 Weight Packs for micro tuning your balance This setup allows you to fine tune both aiming stability and shot reaction. Compound Setup For compound bows we recommend pairing the Vektor 2 with: • EDGE Offset V-Bar• EDGE Small QDC in 0°, 8°, or 10° down depending on preference• EQ Dampers in 40 or 50 stiffness• 4-2-1 Weight Packs Most compound shooters prefer the 50 stiffness dampers. If you are unsure, start there. For archers who prefer a more rigid weight stack, tungsten damping weights provide excellent vibration reduction without affecting aiming stability.
