Format conversion the flexible way Our quad MIDI Interface picks up the flexible voice assignment of VERMONA’s PERfourMER MKII to provide a fourfold MIDI-to-CV/Gate converter for Eurorack-compatible modular systems. This way, you can play your modular synthesizer in different monophonic modes or even polyphonically using MIDI.More than just pitch Each of the four “output channels” offers a CV-output with 1V/octave-characteristic, a gate-output plus two additional control voltage outputs. These can be easily addressed by MIDI-controllers such as the modulation-wheel or pitch bender. The output channels can freely be combined or be used with independent MIDI-channels. Combined output channels can be used in unison, monophonically with rotating voice assignment or even to create polyphony. qMI 2 also offers four clock-divider-outputs. These convert incoming MIDI-clock signals into analogue gate-voltages. A reset-output allows sequencers with corresponding input to run in sync by MIDI-start/stop commands. A new feature of qMI 2 is the option to switch between both monophonic voice assignment modes using a gate signal.Easy access to functionality An important part of the modular concept is the easy access to every parameter, without using displays or complicated menu structures. qMI 2 will help you to integrate your modular-system into your MIDI-setup straight-forwardly! Pitch-CV: 1V/Octave Gate-voltage: 10V CV1, CV2: 0..5V (bzw. -2,5V..+2,5V on Pitchbend) Legato switchable for each channel Clock-outputs (10V) RESET-Output: 10V for MIDI STOP, 0V for MIDI START and CONTINUE http://www.vermona.com/en/products/modules/product/qmi-2/ 24HP 60 mA +12V 2 mA -12V 0 mA 5V 30 mm Depth
