DESCRIPTION This winch support is expressly designed for vertical pulling with our winch PCH2000. If you want to use the winches PCH1000 or PCT1800, you will need to use the support PCA-1264. It is equipped with an adjustable shelf and offers a solid and stable support allowing the winch to be properly seated. It also has a removable "V" shaped pulley mounted on ball bearings, providing optimum rotation. This pulley redirects the rope vertically at an angle to reach sections of towers or pylons far from the center. To install the rope, simply remove the "T" handle and pulley, thread the rope, then put the handle and pulley back in place. Although it was originally designed for lifting, note that it can also be used for pulling when combined with the pivoting anchor (PCA-1332). This accessory therefore makes the PCA-2264 very versatile. Note that when used for horizontal pulling; the "V" pulley is not used. Link for download the manual SPECIFICATIONS Note: The PCA-2264 cannot be used alone; it must be combined with other accessories to be used. Different combinations are therefore possible depending on the type of operation and the environment. Refer to the figures to discover all the possibilities. For instance, when paired with certain accessories, it will permit horizontal pulling. In such case, the winch will face the load and the rope will be in a direct line towards the winch. See Fig. 5, 11, 16, 21 Whereas when combined with other accessories it will be used for vertical pulling. In these cases, the winch will face the anchor point and the rope will come from the top to the winch. See Fig. 7, 13, 18, 23 Material: Steel with high resistance paintWeight: 11.5 kgDimensions: Lg 592 mm x L 429 mm x H 206 mm Please see our video content explaining and showing all the products below. VIDEO CONTENT Since the video mentioned above is 13-minute long, we thought we would put the markers below to allow you to simply select to your product(s) of interest at their designated times. Simply select the time and it will bring you to the correct time spot of the video PRODUCTS STARTS AT Anchoring systems for trees and poles 1 min 10 sec PCA-1260 - Polyester sling 1 min 15 sec PCA-1263 - Tree-mount winch anchoring system with rubber pads 1 min 37 sec PCA-1268 - Winch support plate 3 min 31 sec PCA-1264 (PCA-2264) - Vertical pull winch supports. Products modified since. 4 min 26 sec PCA-1269 - Tree-mount winch anchoring system 6 min 50 sec Anchoring systems for vehicles 8 min PCA-1267/PCA-1501 - Hitch square tubing 8 min 13 sec PCA-1266 - Heck Pack anchoring system with adaptor for 50 mm tow ball 8 min 30 sec PCA-1268 - Winch support plate 8 min 45 sec PCA-1264 (PCA-2264) - Vertical pull winch supports. Products modified since. 9 min 35 sec PCA-1261 - Hitch plate for towing balls 11 min 34 sec
