VESF Vinylester Styrene Free Chemical Resin

wesupplyfixings Verified independent store

→

VESF Vinylester Styrene Free Chemical Resin Vinylester styrene-free low odour resin is a high-performance, rapid curing, two component, mix in the nozzle resin with European approv al. Suitable for many kinds of solid and hollow masonry. Simple to apply by pumping a required resin quantity into the hole. European Technically Approved (ETA) low odour resin used in safety-critical fixing For enclosed, poorly ventilated, damp and wet environments High-performance resin with consistent results Offering exceptional tensile strength in a range of environments and conditions Ready to use Mixing nozzle included Low extrusion force Fire-rated Closer edge and axial spacing Low Ventilation, Wet, Rebar, Underwater environments Technical Data M8 Stud Size Rec. Tensile Load (kN) (Test Material Concrete 25n/mm2) 9.1 Min. Embed. Depth (mm) (Test Material Concrete 25n/mm2) 80 Approx. Holes per Cartridge (at standard embed. depth) 68 Base Material Temp. (°C) 35 Typical Gel Time (mins) 3 Min. Load Time (mins) 20 M10 Stud Size Rec. Tensile Load (kN) (Test Material Concrete 25n/mm2) 13.8 Min. Embed. Depth (mm) (Test Material Concrete 25n/mm2) 90 Approx. Holes per Cartridge (at standard embed. depth) 42 Base Material Temp. (°C) 25 Typical Gel Time (mins) 5 Min. Load Time (mins) 30 M12 Stud Size Rec. Tensile Load (kN) (Test Material Concrete 25n/mm2) 19.4 Min. Embed. Depth (mm) (Test Material Concrete 25n/mm2) 110 Approx. Holes per Cartridge (at standard embed. depth) 25 Base Material Temp. (°C) 15 Typical Gel Time (mins) 9 Min. Load Time (mins) 60 M16 Stud Size Rec. Tensile Load (kN) (Test Material Concrete 25n/mm2) 26.8 Min. Embed. Depth (mm) (Test Material Concrete 25n/mm2) 125 Approx. Holes per Cartridge (at standard embed. depth) 13 Base Material Temp. (°C) 5 Typical Gel Time (Mins) 20 Min. Load Time (mins) 90 M20 Stud Size Rec. Tensile Load (kN) (Test Material Concrete 25n/mm2) 35.7 Min. Embed. Depth (mm) (Test Material Concrete 25n/mm2) 170 Approx. Holes per Cartridge (at standard embed. depth) 5 Base Material Temp. (°C) -5 Typical Gel Time (mins) 40 Min. Load Time (mins) 180 M24 Stud Size Rec. Tensile Load (kN) (Test Material Concrete 25n/mm2) 44.6 Min. Embed. Depth (mm) (Test Material Concrete 25n/mm2) 210 Approx. Holes per Cartridge (at standard embed. depth) 3 Base Material Temp. (°C) -10* (Resin temperature must be at least 20°C) Typical Gel Time (mins) 50 Min. Load Time (mins) 240 Show more