Victron Multi RS Solar Inverter/Charger Description: The Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with two independent 3kWp PV 450V MPPT tracker inputs for 6kWp PV total. Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. The display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device, using the VictronConnect app. In mid-2023 the Multi RS was revised from a single MPPT tracker to a dual MPPT tracker model. Victron Multi RS Solar Specifications PowerControl & PowerAssist Yes Transfer switch 50 A Maximum AC input and pass-through current 50 A INVERTER DC Input voltage range (1) 38 – 62 V AC Output (2) - Output voltage 230 VAC ± 2 % AC Output (2) - Frequency 50 Hz ± 0,1 % Maximum continuous inverter current 25 Aac Continuous output power at 25 °C Increases linearly from 4800 W at 46 VDC to 5300 W at 52 VDC Continuous output power at 40 °C 4500 W Continuous output power at 65 °C 3000 W Peak power (3) 9 kW for 3 seconds, 7 kW for 4 minutes Short-circuit output current 45 A Max. AC output overcurrent protection 30 A Efficiency 96,5 % at 1 kW load, 94 % at 5 kW load Zero load power consumption 20 W Low Battery shutdown 37.2 V (adjustable) Low battery restart 43.6 V (adjustable) SOLAR Maximum open circuit PV array voltage (4) 450 V Start-up voltage 120 V MPPT operating voltage range 65 – 450 V Maximum operational PV input current limit 13 A Maximum PV conversion power 6 kW total – 3 kW per tracker Maximum PV short circuit current 16 A Earth leakage trip level 30 mA Isolation fail level (detection before start-up) 100 kΩ CHARGER AC Input Nominal Voltage: 230 VAC, Input voltage range: 187-265 VAC, Nominal frequency: 50 Hz, Input frequency: 45-65 Hz AC inrush current NA Programmable charge voltage range (5) 36 – 60 V Charge voltage 'absorption' Default setting: 57,6 V (adjustable) Charge voltage 'float' Default setting: 55,2 V (adjustable) Maximum charge current from AC (6) 88 A @ 57,6 VDC Total maximum charge current (AC + PV) 100 A DC Battery temperature sensor Included Battery voltage sense Yes GENERAL Auxiliary output (AC-out-2) (7) Yes 3-phase and parallel operation 3-phase support with one unit per phase. Parallel not supported. Programmable relay (8) Yes Protections(9) a - g Data communications ports (10) VE.Direct, VE.Can & Bluetooth Bluetooth frequency & power 2402 - 2480 Mhz, 4 dBm Programmable analog/digital input/output ports Yes, 2x Remote on-off Yes Operating temperature range -40 to +65 °C (fan assisted cooling) Maximum altitude 2000 m Humidity (non-condensing) max 95 % ENCLOSURE Material & Colour steel, blue RAL 5012 Protection category IP21 Protective Class: I Battery-connection M8 bolts PV Connection 2 strings, each with positive and negative MC4 230 VAC-connection Screw terminals 10 mm² (6 AWG) Weight 12,3 kg Dimensions (hxwxd) 462 x 425 x 127 mm
