If you've ever wanted to be able to play the VirtualBoy without having a seizure, or in a different color than red, if you want to stream gameplay from real hardware, or if you've want to use a projector to show off your awesome skills at shows and expos, now you can! Features: Pixel-perfect scaling, crisp video output. Select any of 8 palettes, red is default. Customization possible for a small fee. Install on either left or right eye displays. Or both. Choose yourself between low-lag or no-tearing options. Can fit inside the VirtualBoy unit itself. Simple install, minimal wiring. Two Versions VGA 800x600 at 60fps; upscaled x2 768x448 NTSC 240p at 60fps; No upscale, slightly squished horizontally What you get: The programmed and tested board A ribbon cable What's required: Reasonable quality soldering iron and solder (leaded preferred) A long 4.5mm "Game bit" screwdriver About 3 meters of ~22AWG flexible wire Whatever socket you want: DE-15 (VGA), 7 or 8 pin DIN, Mini DIN, Nintendo AV... A bit of patience and care Obviously, a VirtualBoy unit Virtual Tap is an Open Sourced Project: https://github.com/furrtek/VirtualTap Installation Instructions: English version (V1)Version Française (V1) Recommended Installers can be found here.
