Burst Electronics - VMF-2 - Two Channel Mixer/Fader with Fade to Black The VMF-2 is a 2 channel mixer/fader. It will fade from A to B, B to A or A to Black. There is an auto mode that allows the transition to be preset from 0.2 seconds (approx. 6 Frames) to 6 seconds. The transition occurs upon hitting the TAKE button or a GPI trigger. In the A to B mode, the sources must be genlocked. In the A to Black mode, no B input is required. The output is dc clamped to zero Volts. The VMF-2 is 12 Vdc powered, wall module included. 2 channel mixer/fader Fade from A to B, B to A or A to Black Allows the transition from 0.2 seconds (approx. 6 Frames) to 6 seconds Transition occurs upon hitting the TAKE button or a GPI trigger Output is dc clamped to zero 12 Vdc powered, wall module included Specifications - VMF-2 Input/Output: 1 Volt standard videoInput Impedance: HiZ or 75 Ohms 1%, looping (jumper/switch selected)Output Impedance: 75 Ohms 1%Video Connector: BNC, 4 pin MiniDIN for Y/C inputGPI Trigger: Contact closure initiates actionOutput Protection: Open or Short, infinite durationBlack Output: Sync, Color Burst and 7.5 IRE setup (0 IRE PAL) Bandwidth: 10 MHz @ 0.5 dBDiff Gain: 0.1%Diff Phase: 0.1 degS/N: 60 dBCrosstalk: 60 dBSize (Head End): 4.1 W x 5.5 D x 1.5 H inchesSize (RCU): 2.5 W x 6.0 D x 1.8 H inches DC Powered: 11-14 VdcWall module (included): 120 VAC 60 Hz, 12 Vdc 500 mA, UL Listed
