NOTE: Conventional tuning modules offer only limited functionality compared to today’s e-bike standards. They often rely on complex and unintuitive display button sequences for activating, deactivating, or adjusting speed limits. This makes operation cumbersome, especially during a ride. In some cases, users must stop the bicycle and manually rotate the rear wheel multiple times to initiate or confirm the selected setting — a process that is inefficient and inconvenient for real-world riding conditions. Feature ❌ Conventional Tuning Chips ✅ EPAspeed B.Tuning Setup & Activation Complicated button combinations, easy to forget Simple app control — activate or deactivate with a tap Speed Limit Adjustment Requires rotating the wheel or entering complex codes Instantly adjustable in the EPAspeed app Firmware Resistance Easily disabled after motor or display updates Fully resistant to OEM firmware updates Display Compatibility Often shows wrong speed or altered speed Preserves full speed and distance accuracy Installation Wired directly into display or motor — risk of detection Contactless design — no software interference Bluetooth Functionality Not available Built-in Bluetooth — control settings, monitor stats, set limits User Experience Outdated, difficult to use, and not intuitive Modern, seamless, and designed for real e-MTB riders Safety & Reliability Risk of error codes, firmware lockout, or damage during updates Engineered for long-term reliability with non-invasive integration In contrast, the EPAspeed B.Tuning series represents the next generation of e-bike tuning — fully app-controlled, firmware-resistant, and designed for effortless operation. With Bluetooth connectivity, intuitive controls, and invisible tuning functionality, EPAspeed delivers precision, reliability, and freedom unmatched by conventional solutions. Key Features• Tuning Control – Instantly activate or deactivate tuning• Adjustable Speed Limits – Set your preferred maximum assistance speed• Invisible Tuning Mode – Undetectable operation for smooth and safe performance• Trip Recording – Automatically save and review detailed ride statistics• Comprehensive Ride Data – Monitor distance, duration, average & max speed, and elevation 👉 Click here to view the EPAspeed 1.1 B.Tuning for Bosch TUNING MODULE FOR THE BOSCH SMART SYSTEMCompatible with all Bosch drive systems that are equipped with the Smart System and whose motor support ends at 25km/h ex works. Only bikes that are equipped with a rim magnet are not supported by the tuning. The smart system is easiest to recognise by the display type INTUVIA 100 or KIOX 300 or by the LED remote control unit or the system controller.It is best to use the following selection aid to select the right tuning NOT COMPATIBLE: Bikes with rim magnets are not supported.FUNCTIONS• Automatic initialization, ready for use immediately after installation. No time-consuming calibration required.• The tuning can be conveniently switched on or off using the buttons on the control panel.• After switching on, the speed limit can be set freely in the range of 25 - 45km/h using the plus/minus button. The value set last is saved.• The tuning is always switched off after switching on the bike.• It is possible to set a "softer curtailment behaviour" (dynamic mode). This significantly softens the otherwise very abrupt deceleration at the speed limit. • Individual activation code adjustable. CAUTION: When tuning is activated, from 21km/h the speed displayed is too low and the distance measured is too small. The mileage is therefore too low after using the tuning.The device is installed invisibly on the drive motor from the outside. No cables need to be damaged or modified, the module is simply plugged in and is immediately ready for use.No PC or smartphone is required. All settings are made conveniently via the display on the bike.TECHNICAL SPECIFICATIONS• Case dimensions: 37mm x 19mm x 9mm• Cable length: about 140mm• Weight: 0.017kg• Power consumption: 0.2W• Supply voltage: 12VDCSCOPE OF DELIVERY• tuning module• Installation and operating instructions• 2 cable tiesNOTE SOFTWARE UPDATESWe generally advise against software updates of the Bosch drive system after installing a tuning module. It cannot be guaranteed that the tuning module will also be compatible with future software versions of the drive system.You can find an overview of the currently tested software versions here:https://blog.volspeed.de/bosch-softwarestaende-162/
Related
Related
Related
Related