DESCRIPTION Voltmeter with 1 m (3.3 ft) cable / measurement range ±99.9 mA DC / manual zero point / battery life of approx. 40 hours / automatic power off / clamp opening Ø 5 mm / accuracy of ±0.3% of rdg. The voltmeter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the voltmeter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the voltmeter, the current clamp itself is connected to a 1 meter / 3.3 ft cable. The current clamp can thus be attached to the cable to be measured. The voltmeter can be conveniently placed aside at the workplace. This leaves both hands free while reading the measured values, for example to carry out adjustments or configurations on the process technology. Due to the high accuracy and the external sensor, the voltmeter is ideally suited to make quick and reliable current measurements when process signals are involved. In order to carry out a current measurement, the current clamp of the voltmeter must be clamped around the cable to be checked. This allows the voltmeter to measure the flowing current inductively. This has the particular advantage that a current measurement can be carried out during operation with the voltmeter. For improved visibility, the voltmeter is equipped with an LED. With the LED of the voltmeter, the measuring spot can be ideally illuminated. If you have any further questions about the PCE-MCM 10 voltmeter, please take a look at the following technical data or use our contact form. Our technicians and engineers will be happy to advise you on the voltmeter or any other products in the fields of control, laboratory or measuring technology or scales and balances from PCE Instruments. HIGHLIGHTS - Detachable process clamp meter with 1 m / 3.3 ft cable - Clamp opening of 5 mm diameter - Measurement range ±99.9 mA DC - Display with backlight - Operating time of approx. 40 hours SPECIFICATION Measuring range ±20.99 mA DC Resolution 0.01 mA Accuracy ±(0.3 % of rdg. + 8 Digits) Measuring range ±21.0 … ±99.9 mA DC Resolution 0.1 mA DC Accuracy ±(1 % of rdg. + 8 Digits) Influence of the earth's magnetic field on the measured value, max. 0.25 mA DC Diameter of clamp opening Ø5 mm Switch-off automatic Continuously switched on after 10 minutes OFF Operating voltage 3V via 2 AA batteries Battery life approx. 40 hours Protection class IP40 Overvoltage categories CAT II 300V Operating conditions -10 … 50°C / 14 ... 122°F Storage conditions -15 … 60°C / 5 ... 140°F Environmental humidity
Related
Related
Related
Related