VTC-100PA is a tabletop spin coater up to 5" diameter at Max. 10000 rpm. The spin head actuator is a precision DC servo motor with accurate speed and acceleration control. The substrate can be held by vacuum (for thinner objects). The device has a user-friendly keyboard and LCD display for programming various parameters up to 12 programs, 6 segments. Spin duration, spin speed, and acceleration can be programmed from the front panel. All components in the device are corrosion-protected to make it cleanroom-compatible. This spin coaster can be used inside the glovebox with Ar gas. SPECIFICATIONS: Main Features 500 ~ 10000 RPM spinning speed programmable Accept substrate from 5 mm to 5" PP chamber for anti-corrosive operation. One gas inlet port on top of the cover can fill inert gas during coating One 20ml Plastic Syringe is included Suitable using Ar gas (vacuum pump must be outside glovebox) Vacuum Chuck Chamber size: 150mm diameter 2 sets of polypropylene vacuum chucks with different sizes (O-ring ID Φ44mm, Φ10.2mm), which can hold substrate from 10 mm to 5" Dia. ( see pic below ) Click the picture below right to watch the demo video for how to use a vacuum chuck to hold a 10mm square sample. PTFE vacuum chuck is also available upon request. Vacuum Pump One 120L/min Oilless Vacuum Pump is included Ø8 mm plastic vacuum tube is included To use inside an Ar glovebox, feed-throughs are required to connect the spin coater, the vacuum pump, and the controller. The feedthrough is optional upon request. Programmable Control The digital control panel can store 12 programs, and each program has 6 segments programmable for speeds, acceleration, and spin duration (please click the picture left to see typical program settings) Speed: 500 rpm - 10000 rpm programmable Duration up to 60 seconds for each segment Acceleration: 100 - 2000 rpm/ sec adjustable Accuracy: < 5% Input Power AC 220V (Please email us for AC 110V Version) 1000 W total for the oilless pump and spin cater 24VDC high-speed motor Gas Inlet 6mm diameter gas inlet port allows customers to fill the desired gas into the chamber, which can make coating under variable gas flow environment. Liquid Injection Standard Package: 20ml plastic syringe with needle Option 1: Precision Electronic Single Channel Pipette: 20 - 200uL Option 2: Heatable glass syringe with temp. controller, up to 200C Optional Option 1: PE heating cover with a digital single-point PID temperature controller up to 120°C(
Related
Related
Related
Related