RC4WD 1/14 SLEDGE HAMMER HEAVY HAUL 6X6 RTR TRUCK – VV-JD00053 The RC4WD Sledge Hammer Heavy Haul 6x6 is a professionally pre-assembled 1/14-scale transport truck built for serious scale hauling. It combines a hard-plastic European-style cab with a full-metal 2-speed transmission, billet-aluminum transfer case, remote-lockable front and rear axles, leaf-spring suspension and a 6x6 drivetrain designed to move heavy scale loads with realistic truck geometry. HEAVY-HAUL CONSTRUCTION Hard-plastic European-style front cab Full-metal 2-speed transmission with planetary gears Billet-aluminum transfer case Stainless-steel molded fuel tanks Scale leaf-spring suspension Billet-aluminum scale rims Full-metal front and rear axle housings Steel scale driveshaft Painted body Scale wheels and tires Rear light guards Scale light buckets compatible with 3–5 mm LEDs DRIVETRAIN & TRACTION 6x6 drivetrain Remote-lockable front and rear axles Locking differentials Axle gear ratio: 2.6:1 First gear: 1:64 Second gear: 1:16 Brushed motor LiPo cutoff Basic 4-channel 2.4GHz radio system PAYLOAD & DIMENSIONS Scale: 1/14 Length: 28.8 in / 734 mm Width: 9.05 in / 230 mm Height: 10.7 in / 273 mm Truck weight: 6.9 kg / 15.2 lb Recommended payload: 10 kg / 22 lb Maximum load: 10 kg / 22 lb Total loaded mass: 17 kg / 37 lb POWER REQUIREMENTS 5200mAh 11.1V 3S 25C LiPo battery with XT60 plug Maximum battery size: 5.59 × 1.77 × 1.57 in / 142 × 45 × 40 mm Compatible LiPo battery charger 4x AA batteries for the radio Important: RC4WD specifically states not to use more than a 3S / 11.1V battery with this truck. WHAT'S INCLUDED 1x RC4WD 1/14 Sledge Hammer Heavy Haul 6x6 RTR Truck 4-channel 2.4GHz radio system OPERATING & SETUP NOTES Turn on the transmitter before powering the ESC. Inspect all hardware and screws after shipping and before first operation. Use quality hex drivers to reduce the risk of stripped screw heads. Use thread lock where appropriate on metal-to-metal fasteners. Use thread lock sparingly. Do not overtighten screws or small hardware. The truck is intended for experienced RC users and is not recommended for beginners or users under 16. Only the right side of the truck includes a blind mirror with downward view. This product is professionally pre-assembled. GASHEAD RC HEAVY-HAUL NOTE This truck is built to tow and carry meaningful scale loads, but payload alone does not tell the whole story. Trailer rolling resistance, tongue weight, grade, surface traction and locked/unlocked differential setup all affect drivetrain load. When hauling heavy equipment, start in the lower gear, verify trailer balance, keep the driveline free of binding and inspect wheel, driveshaft and axle hardware regularly. SKU: VV-JD00053
