The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time. This allows for the player to use any combination of Evno microphones wireless at the same. A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe. Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ and volume over each channel. The W2 offers a Diversity antenna system which provides a distance at about 100meters. The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output. A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit. The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked. Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR. Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system. The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability. The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions. **see chart below for more information. The W2 system is shipped with a rack-kit, antennas, power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed. Included Components Dual receiver Rack mount kit 2 BNC antennas Power supply User guide EVNO A1 wireless clip-on instrument microphone transmitter 902–928 MHz Countries of Operation Australia (915-928MHz) Brazil (902-907, 915-927.75MHz) Canada Columbia Costa Rica Dominican Republic Ecuador Guyana Hong Kong (923-925MHz) Indonesia (923-925MHz) Mexico New Zealand (915-928Mhz) Paraguay Peru Puerto Rico South Korea (925-928) Venezuela United States of America Receiver Frequency Range: 902-928MHz Receive Sensitivity: -110dBm (sinad ≥30dB) Signal/Noise Ratio: >105dB Power Supply: DC12V/ 500mA Audio Output: 1-XLR, 1- 1/4in Antenna: Diversity, Detachable Transmitter Frequency Range: 902-928MHz RF Power: 10mW Microphone Type: Condenser Directivity: Cardioid Deviation: ±48KHz Antenna: 1/4 wave Length wire type Battery Voltage: 1.5V (1x1.5V AA Battery) Power Consumption: 14 hours, battery-dependent System Specifications Comprehensive Performance Frequency Range: 902-928MHz Modulation Mode: FM Dynamic Range: >100dB Frequency Response: 60Hz-17KHz±3dB Total Harmonic Distortion:
Related
Related
Related
Related