Wacker Neuson PSA2500 2" Submersible Pump Lightweight, portable, single phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications. Features Lightweight, compact design for easy transport and positioning of pump Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid Semi-vortex impeller allows for optimum wear resistance The necessary water level to operate the pump is 4-1/2" from the bottom of the pump Technical Features Wacker PSA2500 Pump Specifications Discharge diameter 2 in Length x width x height 8.7 x 7.3 x 12 in Operating weight 22 lb - 10 kg Max. head 39.5 ft Max. discharge 62.4 US gpm Max. pressure 17 psi Solid size capacity 0.2 in Motor type 110V - Single phase/60 Hz Current (full load/start @ 110V) 6.1/12.5 A Speed 3,270 rpm Max. power output 2/3 hp - 0.48 kW Cable length 32 ft Cable size 16 AWG Impeller material Urethane rubber Impeller type Semi-vortex
