Wafer-Mount™ 559 Mounting Adhesive Plastic film peeled away from paper backing;specimen about to be mounted. Wafer-Mount™ 559 A clear adhesive on a plastic film that is ideal for holding silicon wafers, alumina, or glass substrates for scribing. No heating is required; just remove the paper backing to expose the adhesive layer, position the wafer substrate on the film and press down with firm pressure to insure adhesion. A vacuum manifold or mechanical device may be used to hold wafer/plastic film during dicing or scribing. After dicing or scribing acetone or MEK may be used to separate the specimen from the Wafer-Mount™ 559. Size is 10" x 10" x 0.005" thick in packages of 2.Ideal for scribing/dicing wafers with vacuum hold down fixturing. Specifications Form Sheet Size 0.005" x 10" x 10" (0.127mm x 254mm x 254mm) Color Clear Solvent Acetone or MEK Application Procedures: Cut the Wafer-Mount™ sheet to the desired shape and size and peel the backing paper away from the plastic film. Place the wafer, face up, onto the exposed sticky surface of the adhesive film. Press firmly to assure good adhesion. Please note: The adhesive sheet should be placed on the dull or back side of the wafer, not the top or shiny side. Process the substrate as required, then remove parts by heating in a well ventilated area to 300°F for 2-3 minutes until the adhesive softens. Use a tool to slide the substrate off the mounting plate. Clean with acetone or MEK. SDS (176KB PDF) Wafer-Mount™ 562 Mounting Adhesive Thermoplastic white film adhesive with good adhesive properties. Ideal for mounting thin, fragile substrates for which a predictable film thickness is required. Flow point is 200°F (93°C). Soluble in 562-S Stripper. A non-flammable, biodegradable, water-rinsable solvent. Size is 8" x 10" x 0.003" thick in packages of 10. Wafer-Mount™ 562-S Stripper Removes Wafer-Mount™ and other polymer coatings. Environmentally-safe, low evaporation rate, water rinsable, non-flammable, biodegradable and non-reactive with metals. Recommended for use in an ultrasonic cleaner. Rinse with warm water. Use with protective gloves, eye goggles, and ventilation or fume hood. C - SDS (149KB PDF) - There are Hazard Shipping Fees associated with this product. Hazard Warning Guides Used in Product Listings Cg = Suspected Carcinogen C = Corrosive E = Environment F = Flammable H = Health I = Irritant L = Lachrymator O = Oxidizing R = Radioactive S = Sensitizer T = Toxic U = Unlisted as hazard; unknown hazard if any An extra shipping charge is required by the Carriers when hazardous goods are transported.
Related
Related
Related
Related