The Walker B27i Commercial Zero Turn Mower - Making big Jobs easy! About the B27i This higher horsepower, new generation version of the Model B adds a Kohler 26.5 HP, EFI engine and includes a redesigned unitized chassis and front body. The new clamshell body makes drivetrain component access easier, and the Ogura electric clutch with Soft Start adds convenience and durability for the operator.An oversized Donaldson 5 inch air filter is fitted with a turbine style pre-cleaner and restriction gauge to reduce maintenance intervals while providing a robust filtration system. A new rear axle design improves rough condition handling, coupled with Walker’s Comfort Seat and optional 20” drive tires, make the B27i a comfortable machine that is powerful, efficient, and ready for larger decks and difficult conditions. Features: 22.5 HP@3600RPM Kohler Command Pro® CH680 Tilt-up body completely exposes drive train Hydro Gear™ ZT3100 Transaxles 17.8 Liter Fuel Tank 13 kph ground speed Specifications: Engine Manufacturer: Kohler Model: ECH749, EFI Displacement: 747 cc (45.6 cu. in.) Max Power: 26.5 HP @ 3600 RPM Max Torque: 40 ft-lbs Cooling System: Air Fuel: Automotive Grade Unleaded Gasoline (87 Octane Minimum, 10% Ethanol Maximum) Fuel Capacity: 17.8L Electrical Battery: 12V, 300CCA Charging System: Flywheel Alternator Charging Output: 20 Amp DC (Regulated) Transmission Manufacturer/Model: Dual, Independent Hydro-Gear® ZT3100 Integrated Transaxles Steering: Hand Lever Control, Individual Wheel Forward Speed Control: Precision Friction Lock Lever, Cruise Control, with Neutral-Park Position Parking Brake: Internal Mechanical Cog Lock for each Transaxle (Single Lever Control) Forward MPH (km/h): 0-8 (0-13) Infinitely Variable Neutral: Transmission Release by Manual Dump Valve Blade Drive PTO Shaft: Quick Disconnect Splined Shaft with Two (2) High-Speed U-Joints Blade Drive Clutch and Brake: Ogura Electric Clutch with Soft Start Engagement and Mechanical Brake [Stops Blades within Five (5) Seconds of Disengagement] Deck Deck Suspension: Independent Torsion-Flex Frame with Caster Wheels and Counterweight Springs Cutting Height: 1.5 to 4 in. (4 to 10 cm) 1.5 to 4.5 in. (4 to 11.5 cm) Tyres Drive: 18 x 8.50-10 (Pneumatic 4-Ply Low-Profile) Tailwheel: 11 x 4.00-5 (Pneumatic 6-Ply) Dimensions: Length 160cm Width 98cm Height 100cm Weight 280kg Due to the size and weight of these items, it can be hard to provide an accurate shipping estimate. Please note that shipping may cost extra depending on your location. Please contact us if you would like a shipping quote before purchase.
