Fundamental Distortion The Fundamental Distortion is a three-mode distortion. It covers a wide range of sounds from dark and doom through sharp cutting leads. Gain – The Gain slider sets the amount of gain applied to your guitar signal passing through the distortion circuit. Tone – The Tone slider controls the signal's frequency response after distortion. Left of center cuts highs and right of center boosts highs. Volume – The Volume slider sets the overall output volume of the pedal. Slide Switch – The slide switch allows you to change between three distinct flavors of the pedal. Each position has different clipping modes or tone profiles. Dark - Asymmetric silicon clipping with an added high-frequency cut. Think dark and dynamic. Si - Classic silicon hard clipping diodes. Things get compressed and crunchy. LED - LED hard clipping diodes. A dynamic and crunchy sound. Note: The LED clipping mode will be louder due to the nature of the LEDs, so use your volume slider to compensate! Specifications The Distortion comes in a Black finish with yellow and off-white ink. The diecast enclosure’s exact size is 4.33" x 2.16" x 1.61”. Power requirements are 9VDC (100mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.
