Canvas is Walrus Audio’s first line of DI Boxes: Mono & Stereo version availableConvert your unbalanced signal into a balanced signal for interfacing properly with e.g. your recording interface or FOH mixerSelect between DI or LI (line isolator) modeDI Mode = for high impedane sources such as E-Guitars or BassesLI Mode = for low impedance line level sources such as Amp-sims (e.g. ACS1) or KeyboardsFully passive – no power requiredStompbox format for super easy integration on pedalboardCoolest looking DI Box on the market Full Feature List Passive Line Isolator and Direct Injection device Converts ¼” unbalanced input to XLR balanced output For interfacing with your recording interface or FOH mixer Works perfectly with amp-in-a-box devices e.g. Walrus Audio ACS1 Stompbox format for easy integration on pedalboards Choose between DI- or Line-Isolator-Mode Flat frequency response from 20Hz-20kHz Custom wound transformers for low THD and full frequency response Transformer isolated output Sum switch When disengaged (out), the left input connects to the left thru. The right input connects to the right thru allowing the use of stereo amplifiers When engaged (in), Sum connects the left and right thru jacks together to combine the signals for running into a single amplifier (use either thru jack) Pad: Enabled a -15dB input pad (only in D.I. mode) to minimize distortion GND Lift: Isolates GND pin on XLR to reduce hum Passive design – no power required Made in the USA
