Warm Dune Contours Transform your space with soft, sand-inspired waves in warm neutral tones. Warm Dune Contours brings a calm, organic flow to bedrooms, living rooms, nurseries, hallways, and home offices—designed as a renter-friendly, peel-and-stick removable wallpaper. Key Features Rolls measure 24 inches wide and up to 120 inches high for easy planning and minimal seams. PVC-free substrate printed with eco-friendly, water-based inks. Removable and repositionable during installation; great for renters and refreshes. Low-odor, matte finish to reduce glare and enhance the design’s soft contours. Ideal for smooth, painted walls, doors, and other flat, non-textured surfaces. Before You Order Measure wall height and choose a panel height up to 120 inches. Add a little extra for trimming at ceiling and baseboard. Order enough panels for the full width of your wall (each panel is 24 inches wide). Color can vary by screen; consider testing with a sample on your wall and lighting. Care Instructions Wipe gently with a soft, damp cloth; use mild soap if needed. Avoid abrasive scrubbers, bleach, or solvent-based cleaners. Keep away from sustained moisture and direct heat sources. Installation Guidance Prep the wall: Ensure it’s smooth, clean, and fully dry. Newly painted walls should cure for at least 30 days. Avoid textured, dusty, or damp surfaces. Plan your layout: Start from a plumb line using a level. Unroll and dry-fit the first panel to confirm placement. Peel and place: Peel 6–10 inches of backing, align the top, and stick lightly. Work downward in sections. Smooth: Use a felt squeegee or soft cloth to press out air, moving from center to edges. Trim: Use a sharp utility knife along ceiling, baseboards, and around outlets. Repeat: Align the next 24-inch panel edge-to-edge. Slightly overlap only if needed to match the design. Settle: Allow 24 hours for full adhesion. To remove later, peel slowly at a 180° angle. Good to Know Adheres best to eggshell, satin, or semi-gloss paint on smooth drywall. Not recommended for heavy texture, brick, stucco, or areas with high humidity. Removes cleanly from most properly primed, painted walls when installed as directed. Sustainably made: always PVC-free and printed with eco-friendly, water-based inks.