Warthog WH 1/2" / 3/4" Nozzle The Warthog WH nozzle 1/2" and 3/4" nozzles by Stoneage are best suited for larger lines and higher GPM flows. StoneAge utilizes a slow, controlled rotation to maximize the dwell time of the water to penetrate deeper through deposits and to get a better clean of sewer lines. The nozzle is best suited for sewer lines from 6" to 12" in diameter and up to 500' in length, however, the WH is very effective beyond that distance. Still Not Convinced? Watch More Here! The Warthog WH nozzle is fitted with StoneAge's replaceable AP2 nozzle tips sized to maximize pump efficiency and effectiveness. The nozzle jet tips are made of hardened stainless steel to resist cracking and scratching. These tips are replaceable for extending the usable life of the nozzle. The Warthog WH nozzle comes with its own centralizer skid and a Tyger-Tail is recommended when leading the nozzle in to the line. The WH nozzle comes in 1/2" and 3/4" sizes. Be sure to select the correct configuration for your jetting application. ** Please call us for more information about the descaler head. ** The Warthog WH nozzle models with a descaler head allow a higher level of cleaning when scale, tuberculation, corrosive products, soaps, and minerals build up on the sewer walls. It does this with two additional 105-degree jets combined with a plug on the front insert for maximum sewer wall cleaning. The most important item in maintaining the Warthog is keeping the tool full of viscous fluid. The tool also has a high pressure seal and seat that will need to be replaced if the tool begins to leak water from under the Weep Seal. The tool may leak water at low pressure intermittently, but if it leaks at operating pressure, it is time to change the seal. Find more about our Service Kits and Overhaul Kits here! Need Help Deciding? Give Us A Call!
