Water-Based Fluorescent Ink (WBFL Series) prints high-visibility neons that pop under natural light and glow under blacklight — with the soft, breathable hand only water-based gives you. Phthalate-free and built for fashion, festival and streetwear work where the color is the whole point. 12 fluorescent colors. Pint, quart, gallon and 5 gallon. Made in Hackensack, New Jersey. Best for Streetwear, festival and nightlife apparel — reacts under blacklight 100% cotton and cotton/poly blends High-impact neon graphics where a soft hand still matters How to run it Type Water-based fluorescent · phthalate free Substrate 100% cotton · cotton/poly blends Underbase Print over a white underbase on dark garments for maximum neon pop Mesh 110–160 Flash 250°F (121°C) for 3–5 seconds Cure 320–350°F (160–177°C) — all moisture must evaporate before the ink is fully cured On press Keep it moving — water-based dries in the mesh if the press stops. Use a retarder for long runs. Cleanup Water and mild soap Storage 65–90°F, sealed, out of direct sun. Do not freeze. Sizes Pint · Quart · Gallon · 5 Gallon Fluorescent pigments are bright but not UV-stable long-term — neon colors will fade with prolonged sun exposure faster than standard colors. Perfect for fashion and event wear; not the pick for long-term outdoor signage. Need a color we do not stock? Our proprietary UMX (Ultimate Mixing System) matches any target color — in water-based, plastisol, solvent or UV ink. Standard turnaround 48–72 hours under D50 lighting. Free software: umxsystem.com. Safety & handling Keep out of reach of children Avoid prolonged skin contact — wash with soap and water Use with adequate ventilation, particularly at the dryer Refer to the Safety Data Sheet before use Questions? Total Ink Solutions LLC 200 South Newman Street, Unit 4 & 5 Hackensack, NJ 07601 Phone:877-937-6400 Email: [email protected]
