The WaterBug 200 ("WB200") is a water detection device ideal for computer rooms, document storage areas, warehouses, sump pumps and basements. WaterBug sensors activate the alarm when a conductive bridge is formed between 2 contacts. Protect your assets with the WB200. Main Features Monitors for the presence of water. Can be used to detect the absence of water. Device includes one standard unsupervised surface sensor (W-S-U). Device accepts up to six total sensors (W-S-U). Additional sensors (W-S-U) sold separately. 1 to 2 sensors can be located up to 200' (60.96m) or 3 to 6 sensors can be located up to 100' (30.48m) away from the device for a wide area of protection. Use 18-22 AWG twisted pair wire for extension of sensors from the device. Hard wire powered device. Ensure that the power running to the device does NOT have a connection to earth ground. This could result in a failure to detect water or ground fault. Power requirements of 8 to 28V DC at 35mA or 12 to 28 V AC at 100mA Unit operating range of 32 to 130 F (0 to 54 C) in non-condensing environment. Indoor use only. Output is 1 Form C (N.O./N.C.) with 30V DC at 1 Amp resistive/24V AC at 1 Amp resistive Dimensions of 4.1" x 2.36" x 1.18" (10.4cm x 6.0cm x 3.0cm)
