Waterproof temperature sensor with DS18B20 probe, easily connects to Arduino, offers 9-12 bit readings, supports 3.0-5.5V systems for multipoint measurement. Introduction This waterproof temperature sensor kit use DS18B20 probe AS. It contains a probe with a resistor module. So it is easy to connect on the Arduino board. The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems. Check 27 Pcs Sensor Kit for Arduino to get more sensors for Arduino. If you want to make a simple water purifier, we recommend buying together with Gravity: Analog TDS Sensor/Meter for Arduino. Specification Operating voltage: 3.0~ 5.5V ±0.5°C Accuracy from -10°C to +85°C Usable temperature range: -55 to 125°C (-67°F to +257°F) 9 to 12-bit selectable resolution Uses 1-Wire interface- requires only one digital pin for communication Unique 64 bit ID burned into chip Multiple sensors can share one pin Temperature-limit alarm system Query time is less than 750ms 3 wires interface: Type A Red wire - VCC Black wire - GND Yellow wire - DATA Type B Red wire - VCC Yellow wire - GND Green wire - DATA Stainless steel tube 6mm diameter by 35mm(1.34") long Cable diameter: 4mm(0.16") Length: 90cm(35.43") Documents Wiki Doc Shipping List Waterproof DS18B20 Digital temperature sensor (DFR0198) x1 Terminal sensor adapter (DFR0055) x1 Digital sensor cable (FIT0011)
Related
Related
Related
Related