Product Highlights Material: Handcrafted from Natural Solid Wood, finished with a smooth protective surface that keeps the grain visible and pleasant to touch. Design: A modern solid wood wave headboard built around two long, wave-cut panels whose flowing crests echo each other across the width of the bed. Structure: Two shaped wood panels — one upper, one lower — set inside a slim rectangular metal frame, with an open gap between them that lets the wall show through. Details: Each panel carries a contrasting pale sapwood band tracing its curved edge, so the wave line reads clearly even from across the room. Functionality: A decorative headboard panel that frames the pillows, softens a bare wall behind the bed, and gives the sleeping area a defined focal point. Uniqueness: The wave line is cut and finished by hand, so the rhythm of the curve and the pale edge banding differ slightly from piece to piece. Available sizes: 54"W × 31.5"H × 2"T, 60"W × 31.5"H × 2"T, 72"W × 31.5"H × 2"T, and 76"W × 31.5"H × 2"T. Tone finishes: Brown, Walnut, Oak, and Black — surface finish coatings applied to the same Natural Solid Wood. Once our products are finished, we disassemble them into several pieces before shipping. This isn't a shortcut — it's actually to protect your order! Our pieces can be large and bulky, so breaking them down makes them much easier to package securely and move safely, which means your item arrives without any dents, cracks, or damage from bumps during transit. No worries about assembly, though — our craftsmen carefully design every joint and connection to fit together snugly and precisely once you put it together. Plus, we include detailed assembly instructions with every order, so you can set everything up with confidence. A Statement of Nature & Craft Two long waves travel across this headboard, one above the other, and the eye follows them the way it follows water. The upper panel rises toward the centre and settles again at the far side; the lower panel answers it with a slower, broader swell. Between them a narrow open channel lets the wall breathe, so the piece never feels heavy despite its width. Living with it is quiet work — the first thing you notice each morning is a line that moves, and the last thing at night is a warm wooden horizon behind the pillows. Natural Materials & Fine Craftsmanship Both panels are shaped from Natural Solid Wood, cut along a flowing curve and then sanded until the edge feels rounded and continuous under the hand. The pale sapwood band that follows each wave is part of the same board, not an applied inlay, which is why its width shifts naturally along the length. A slim metal frame runs around the outer rectangle, holding the two panels in alignment and keeping the composition square against the wall. Grain, knots, and the small tonal shifts inside each panel are left visible rather than sanded flat, and the whole face is sealed with a protective wood surface. Sculptural Design & Thoughtful Function The two-panel layout is what gives this headboard its depth: the upper wave sits proud of the lower one, and the open gap between them casts a soft shadow line that changes with lamplight. At 31.5 inches high, the panel rises well above stacked pillows so the design stays fully visible when the bed is made. The metal frame keeps the outer silhouette crisp and rectangular, which balances the organic cut of the wood and lets the piece sit comfortably in a minimalist or contemporary bedroom. Because the composition is horizontal, it visually widens the wall behind a bed rather than crowding it. Versatile Placement Position the headboard centred on the wall at the head of the bed, aligned to the mattress width you have chosen from the four available sizes. It works behind a low platform bed, a slatted frame, or a mattress-and-base setup, since the panel is a separate decorative element rather than part of a bed frame. Beyond the primary bedroom, the same piece suits a guest room, a studio sleeping nook, or a boutique-style rental where a full bed frame would take up too much visual room. Leave enough clearance above the mattress so the lower wave stays readable behind the pillows. Customization & Personalization Custom widths can be made to match a mattress size or a specific wall opening that falls outside the four standard options. The tone finish is yours to choose from Brown, Walnut, Oak, and Black, each a surface coating over the same Natural Solid Wood, so you can pull the piece toward warm or graphic depending on the room. Finish texture can also be adjusted between matte, satin, or waxed. Tell us about your wall colour and lighting and we will suggest the tone that keeps the wave line most legible. Care & Maintenance Wipe the panels with a soft dry cloth and avoid soaking the surface with water or strong cleaners. Keep the piece out of direct sunlight and away from damp air so the tone stays even over time. Check the mounting points every six to twelve months and re-tighten them if needed. Important Two wave-cut wood panels held within one slim metal frame, offered in widths from 54 to 76 inches to suit full through king mattresses. Each headboard is handcrafted, ensuring uniqueness in every piece. Designed for secure mounting to a flat, solid indoor wall. Production updates available upon request. Note Listing includes the headboard only. Bed frame, mattress, bedding, and nightstands shown are not included. Decorative items are not included. Natural grain patterns enhance the beauty of the piece, completed with a protective wood surface. As this product is made from natural wood, variations in grain, texture, and tone are to be expected — each piece is truly one of a kind.
