PACKAGE CONTENT Weight: 0.35 kg 5.83inch e-Paper x1 e-Paper Driver HAT x1 RPi screws pack (2pcs) x1 GH1.25 9PIN cable ~20cm x1 1 2 3 4 5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480 Pixels, Black / White Dual-Color, SPI Interface 5.83" E-PAPER HAT Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity Ideal for price tags, shelf labels, industrial instruments... Size5.83" Resolution648×480 Viewing Angle170° Display ColorBlack / White Grey Scale2 CommunicationSPI Display PanelE-paper ExperiencePaper-like EnvironmentAmbient Light Required Display TypePassively Reflective Features At A Glance No backlight, keeps displaying the latest content for a long time even when powered down Ultra-low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR black, white INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2 OUTLINE DIMENSIONS 125.40 × 99.50mm FULL REFRESH TIME 5s DISPLAY SIZE 119.232 × 88.320mm REFRESH POWER 26.4mW(typ.) DOT PITCH 0.184 × 0.184mm STANDBY CURRENT 170° Advantages Of EINK E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: that charged particles suspended in clear fluid will move to the sides of the microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect. Standard Raspberry Pi 40PIN GPIO Header Compatible With Raspberry Pi Series Boards, Jetson Nano Raspberry Pi, and Jetson Nano in the photo are NOT included. Onboard SPI Control Interface For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/STM32/Arduino VCC 3.3V/5V GND Ground DIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data / Command selection (high for data, low for command) RST External reset, low active BUSY Busy status output PWR Power on/off control Application Examples Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags... Product Show Outline Dimensions
