PACKAGE CONTENT Weight: 0.315 kg Actual Weight: 0.211 kg Note: the Raspberry Pi is NOT included. 6inch HD e-Paper x1 e-Paper IT8951 Driver HAT (B) x1 6inch e-Paper Adapter (B) x1 40PIN FFC (same side contact) x1 USB type A plug to micro B plug cable x1 PH2.0 20cm 8Pin x1 RPi screws pack (2pcs) x1 1448×1072 High Definition, 6inch E-Ink Display HAT For Raspberry Pi, Black/White, 16 Gray ScaleOverviewThis is an E-Ink display HAT for Raspberry Pi, 6inch, 1448×1072 high definition, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32) Specifications Operating voltage: 5V Interface: USB/SPI/I80 Outline dimension: 138.4mm × 101.8mm × 1.01mm Display size: 122.4mm × 90.6mm Dot pitch: 0.0845mm × 0.0845mm Resolution: 1448 × 1072 Display color: black, white Gray scale: 2-16 (1-4 bit) Full refresh time: 170° SPI Pinouts SYMBOL DESCRIPTION 5V Power input GND Ground MISO SPI MISO pin MOSI SPI MOSI pin SCK SPI SCK pin CS SPI chip selection, low active RST External reset, low active HRDY Busy status output, low active Examplee-Paper IT8951 Driver HAT (B) Dimensions
