Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. SIM7070G NB-IoT / Cat-M / GPRS HAT For Raspberry Pi, Global Band Support, With GNSS Positioning NB-IOT / CAT-M / GPRS / GNSS HAT Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi Based on SIM7070G, Global Band Support This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages such as small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on. Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support. Features At A Glance Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo) Onboard USB interface, to test AT Commands, get GPS positioning data, and so on Breakout UART control pins, to connect with host boards like Arduino/STM32 SIM card slot supports ONLY 1.8V SIM card (3V SIM card is not available) 2x LED indicators, easy to monitor the working status Baudrate: 300~3686400 bps Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications NB-IOT/CAT-M/2G Band NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 GSM/GPRS/EDGE: 850/900/1800/1900MHz Data rate NB-IoT: 136Kbps(DL)/150Kbps(UL) Cat-M: 589Kbps(DL)/1119Kbps(UL) GPRS: 85.6Kbps(DL)/85.6Kbps(UL) EDGE: 236.8Kbps(DL)/236.8Kbps(UL) SIM card support NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) Applicable region global GNSS Receiver type 16-channel C/A Code Band GPS L1: 1575.42 ± 1.023MHz GLONASS L1: 1598.0625 ~ 1605.375MHz BDS B1: 1559.052 ~ 1591.788MHz Galileo L1: 1575.42 ± 1.023MHz Data format NMEA-0183 Antenna Active antenna OTHER Power supply 5V Operating voltage 5V / 3.3V (configured via 0Ω resistor) Current consumption about 41mA (idle mode) Operating temperature -40°C ~ 85°C Storage temperature -45°C ~ 90°C Dimensions 30.50mm × 65.00mm Standard Raspberry Pi 40PIN GPIO Compatible With Raspberry Pi Series Boards Global Band Support Of NB-IoT/Cat-M/2G NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85GSM/GPRS/EDGE: 850/900/1800/1900MHz Cloud Communication Supports Communication Protocols Including TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT GNSS Positioning Supports GPS, BeiDou, GLONASS, Galileo Positioning What's On Board SIM7070G MP1482 power chip RT9193-33 power chip Raspberry Pi GPIO headerfor connecting with Raspberry Pi USB interfacefor testing AT Commands, getting GPS positioning data, etc. SIM7070G control interfacefor connecting with host boards like Arduino/STM32 SIM card slotsupports 1.8V SIM card ONLY GNSS antenna connector LTE antenna connector Module power key Network status indicator Power indicator Operating voltage selectionA: set IO level as 5VB: set IO level as 3.3V (default) DTR selectionA: DTR is connected to P26B: DTR is disconnected (default) PWR selectionA: PWR is connected to P4 (default)B: PWR is connected to the power supply Selection Guide CAT-M & NB-IOT & GSM CAT-M & NB-IOT NB-IOT SIM7000C SIM7000E SIM7070G SIM7080G SIM7020C SIM7020E Applicable regions China Europe / Africa / Australia / Southeast Asia Global China Europe / Africa / Australia / Southeast Asia Band NB-IoT LTE-FDD: B1/B3/B5/B8 LTE-FDD: B3/B8/B20/B28 B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 LTE-FDD:B1/B3/B5/B8 LTE-FDD:B1/B3/B5/B8/B20/B28 Cat-M B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 N/A GSM GPRS/EDGE 900/1800 MHz GSM/GPRS/EDGE 850/900/1800/1900MHz N/A N/A GNSS GPS, GLONASS, BeiDou, Galileo N/A Data Rate NB-IoT(Kbps) 34(DL)/66(UL) 136(DL)/150(UL) 136(DL)/150(UL) 26.15(DL)/62.5(UL) Cat-M(Kbps) 300(DL)/375(UL) 589(DL)/1119(UL) 589(DL)/1119(UL) EDGE(Kbps) 236.8(DL)/236.8(UL) 236.8(DL)/236.8(UL) GPRS(Kbps) 85.6(DL)/85.6(UL) 85.6(DL)/85.6(UL) Software Features Network protocol TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT, etc. Firmware upgrade USB UART Hardware Interfaces SIM card slot 1.8V/3.3V 1.8V 1.8V 1.8V/3.3V UART Supports AT commands Supports AT commands, firmware upgrading USB Supports AT commands testing, GPS positioning, firmware upgrading, etc. For external power supply ONLY Antenna connector LTE antenna (SMA) + GNSS antenna (IPEX) LTE antenna (IPEX) + GNSS antenna (IPEX) LTE antenna (SMA) Applications Examples Meters, remote control, smart home, smart city, intelligent agriculture, and so on PACKAGE CONTENT Weight: 0.148 kg SIM7070G Cat-M/NB-IoT/GPRS HAT x1 LTE Antenna x1 GPS External Antenna (B) x1 USB-A to Micro-B cable x1 Standoffs pack x1
Related
Related
Related
Related