Welcome Written Metal Coat Rack adds functional wall storage for entryways, mudrooms, and hallway walls while keeping the design decorative. The Welcome Written Metal Coat Rack from Grandmix laser-cuts a cursive 'welcome' script into 1.5 mm powder-coated galvanized metal with hooks integrated below the letters. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 46 cm to 47 in / 119 cm wide. Why It Works Cursive 'welcome' lettering reads as decor signage: Unlike plain hook strips that announce 'storage,' the cursive script announces 'welcome', sets the tone of the foyer for guests and works as a small wall sign even when no coats are hanging. Slim horizontal silhouette fits above benches: 5 to 12 inches tall depending on size, narrow enough to mount above an entryway bench, console table, or below a mirror without competing with the larger furniture pieces. Five sizes from accent to statement: 18-inch suits a small foyer or cottage-style entryway; 47-inch handles a full hallway feature wall, pick by the wall span, not just the hook count. Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first. Key Specs Dimensions: Five sizes (W × H): 18 × 5 in / 46 × 11 cm; 24 × 6 in / 61 × 15 cm; 32 × 8 in / 81 × 20 cm; 39 × 10 in / 99 × 25 cm; 47 × 12 in / 119 × 30 cm. Stands 0.6 in / 1.5 cm from the wall. Capacity: 3 to 6 hooks depending on size, coats, jackets, scarves, bags Material: 1.5 mm laser-cut powder-coated galvanized metal cursive lettering, electrostatic powder-coated Finishes: Black, White Weight: From about 0.5 kg / 1.1 lb at the smallest size Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight. Best placement: Entryway, foyer, front door, mudroom, guest bedroom What's Included Wall-mounted welcome-written coat rack (size and finish as ordered) Mounting screws and wall anchors Care instructions How to Use and Install Mark the two mounting hole positions on the wall using a level, the rack has integrated keyhole openings at the back. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill. Care Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain. Frequently Asked Questions How many coats does each size hold? 3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). The hooks sit below the cursive lettering and comfortably hold coats, jackets, bags, or scarves. Lighter items like hats can share a single hook. How does it mount to the wall? Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations. Can it be installed in humid spots like bathrooms or covered porches? The powder-coated galvanized metal finish handles standard indoor humidity well, entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended. How do I match the finish to existing decor? Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes, both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look. How do I clean the rack? Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.
Related
Related
Related
Related