Description: The T10-HG is a super long-throwing green LED hunting light specially designed for outdoor hunting. It is available in 2 types: T10-HG (green light) and T10-HR (red light) for different preys. The T10 adopts Projection Compact green LED (about 550nm) or red LED (about 620nm), which can dispense with color filter. LED of high luminous intensity with super-concentrating reflectors creates extraordinary long-range beam! T10-HG's light intensity up to 158,000 candela! The luminous flux is up to 994 lumens and the beam distance is 795 meters! The standard 1-inch diameter body is suitable for most mounts and can be easily mounted on shotguns with optional tail remote switches. T10 has high and low modes with beacon mode which is convenient for positioning in the field. IP67 rating, it can be used in heavy rain. The unibody construction of the T10 gives it a high rate of heat dissipation and shock resistance, and the drive circuit is with high-efficiency temperature control protection function, complementing the built-in multiple tiers of protection system, including low-voltage warning, reverse polarity protection. The veteran hunters know that the light intensity of hunting lights is more important than the luminous flux. Hunters can easily find hogs, wolves, foxes or even hares which are hundreds of meters far away, thanks to the help of T10 "Devil Incarnate". Specifications: Aero-space Aluminum alloy with anodized surface treatment Reflector: Aluminum smooth mirrored reflector LED: High efficiency compact Green X-LED, cooperating with thermoelectric separation copper MCPCB Output & runtime: Tested by Weltool UB18-35 Li-ion battery T10-HG Green Light Mode Low High Beacon Output 382LM 994LM N/A Candela 65000cd 158000cd N/A Beam distance 510m 795m N/A Runtime 3h28min 1h35min N/A Battery: Powered by 1 piece of 18650 3.7V Li-ion battery or 2 pieces of CR123A 3V lithium batteries. Switch: Tactical tail switch, rated for 50,000 presses. Reverse polarity protection Low-voltage warning (Except when using CR123A batteries) Over-discharge protection (Except when using CR123A batteries) No PWM, no electric droning noise, with temperature controlling protection. Double-sided anti-reflective coating tempered glass lens Shockproof, tested to 1 meter IP67 rating Individually serialized Dimensions: 53mm / 2.09” (Head Dia.) x 25.4mm / 1” (Body Dia.) x 163mm / 6.42” (Length) Weight: 255.5±0.5g (w/o battery) Accessories included: O-ring *** Please Note *** 18650 Battery Included Directions: Open the tail cap by twisting counter-clockwise, insert a charged quality battery with the positive terminal towards the bezel, and tighten the tail cap by turning clockwise. The flashlight has reverse polarity protection, the light will not be damaged by batteries inserted in the wrong orientation, but it will not turn on. If this occurs, please check the battery orientation. Half press the tail switch to turn on the flashlight, loosen to turn off the flashlight. Each time the flashlight is turned on, the default setting is "LOW". When the flashlight is off, half press the tail switch to cycle between LOW, HIGH and beacon modes. Fully press the tail switch until "click" is heard to lock the mode, and fully press again to turn off the flashlight. When the battery voltage is too low, the flashlight will flash 2 time as a warning. When the flash is given, please change to a new battery. After the first flash warning, the flashlight will operate for several minutes as a safety measure. After several minutes, the second flash warning will be given. After this warning, the flashlight will shut off automatically. Caution: Unauthorized disassembly may damage the flashlight and void the warranty. Weltool "Total Heat Dissipation" technology will dissipate the internal heat of the light during operation, it is normal to feel the flashlight body temperature rise. Please check and replace the O-ring regularly to maintain the waterproof rating. Please check and lubricate the threads regularly with professional lubricant. Clean the contact surfaces regularly to keep the flashlight normal operation. If irregular strobe or failure to turn-on occurs, the contact surfaces may be dirty and requires cleaning by using alcohol cotton swabs. Remove the battery from the flashlight during long term storage. This flashlight is not intended to be used as a diving light. Do not aim the flashlight directly at eyes. Keep out of the reach of children.
