W35B V2 is a compact tactical rail light with high luminous flux and high intensity, delivering 1,520 lumens and 120,000 candela, with a beam distance of up to 692 meters. The bezel diameter is only 31.5 mm, and the body has two mounting holes that allow the W35B V2 to be installed on Picatinny, MIL-STD-1913, STANAG 2324, STANAG 4694, Weaver, and other similar rails using the Weltool PM4 mount. It can also be mounted to M-LOK or KeyMod rails with other dedicated mounts. The light head uses a fully potted structure for excellent shock and vibration resistance. It is IP67-rated, providing waterproof and dustproof protection. It comes standard with a tail tactical momentary switch that supports full-power output; a soft press provides silent momentary activation, and a click engages constant-on mode.With a modular design, the LH8 V2 light head, W35 body, and TC70 tailcap are all compatible with Weltool series accessories. Product Features: The housing is CNC-machined from aluminum alloy and anodized (available in black, FDE, OD green, and other colors) Equipped with a high-power 5700K neutral white X-LED Output: Color Temperature 5700K Output 1520lm Intensity 120000cd Beam Distance 692m Runtime 33 min Data is obtained from outdoor continuous lighting test using Weltool UB18-12P high drain Li-ion battery and Panasonic CR123A battery. Powered by one rechargeable high-drain 18350 lithium-ion battery Equipped with a tail press switch capable of full-power output, with a lifespan of 50,000 presses Features reverse-polarity protection Includes low-battery warning and over-discharge protection No flicker, no noise, no delay, and equipped with temperature regulation protection Tempered glass lens with double-sided anti-reflective coating 1-meter impact resistant IP67 rated for dust and water resistance; can be used in heavy rain Each light head has a unique serial number Dimensions: (Head diameter) 31.5 mm, (Length) 119 mm ± 0.5 mm Weight: 106g ± 0.5g (excluding battery) Included accessories: one USB-rechargeable high-drain 18350 lithium-ion battery, O-ring, and USB charging cable Operating Instructions: Install the battery correctly before use. This tactical light has reverse-polarity protection. If the battery is inserted incorrectly, the light will not turn on, but it will not be damaged. please check whether the battery is inserted in reverse. After installing the battery, half-press the tail switch (without releasing) for momentary activation; release the switch to turn it off. Fully press the switch until you hear a “click” to activate constant-on mode. Press it again until it clicks to turn the light off. When the battery is low, the light will flash to indicate low power, then the brightness will decrease. Please replace the battery promptly. After the warning flash, the light may shut off automatically at any time.
