Weston Cougar 2000 V2 Kit Main picture is the original ARTF model The Cougar 2000 v2 is an easy build kit which is capable of taking pilots from their first day on the field to the show circuits of the world. Intensively developed over several years to fully optimise its fun-fly and 3D flying characteristics. The Cougar has such a good slow flying speed it is an ideal trainer aircraft with the rates on, then flick the rates off and the Cougar can take you to the edge of your capabilities. With the plane correctly set up it will sustain prop-hanging manoeuvres "hands off" making this the ideal prop-hanging trainer.The Cougar can be built for IC or electric power. Laser cut kit version of the ARTF Cougar 2000 the ultimate 3D machine and trainer Now features a two piece wing and an open top battery hatch for easy battery change without the need to remove the wing. Included in the Kit Pre cut ply wing ribs, spars and fuselage formers, 1x undercarriage struts, wheel spats, 1x wing spar, 1x 6mm nylon wing bolt, 1M6 captive nut, 10x M3 captive nuts, 5x 1/16 balsa sheet, 5x 1/2x 1/16 balsa strip, 1x 3/16 balsa sheet, 3x 1/4 x 1/8 balsa strip, 2x closed loop wire guide tubes, 2x 6mm hardwood dowel Required to complete kit:- Wheels (2.5 to 3inches), Fuel Tank, Linkages, Control Horns etc#Adhesive, Covering, Radio equipment and engine Suitable power set up, I/C: West 36T2R and Genesis Mini Pipe Electric: Roxxy 4250/06 800kv 60A ESC Wingspan: 1240mm Weight: 1,4kg Servos x5 (IC) x4 (electric) Engine .25-.40 2 stroke