Perfectly apply films on glass panes and vehicle windows with Yellotools WetMaxx The new WetMaxx squeegee system makes wet application of window films, tinting films and decorative films easier than ever: The squeegee blade, specially developed for flat glass applications, glides smoothly over the film and expels the application fluid without leaving any air pockets. Be it UV protection films on office windows, decorative films on partitions in the restrooms or window tinting films on rear and side car windows - Yellotools WetMaxx is the ideal tool for professional applications in signmaking and car wrapping! The squeegee blade is available in two degrees of hardness and three shape variants: the orange version with 90° shore is perfect for applications on curved vehicle windows, the white variant (95° shore) is designed for flat glass surfaces such as shop windows and glass facades. In addition to the rectangular version with a width of 130 mm / 5" (only in 90° shore), we offer two trapezoidal versions with widths of 130 and 160 mm / 5" and 6.3" and 15° of edge angle, each available with 90° and 95° shore. Heavy-duty design for easy handling and long durability Two sturdy aluminum retaining plates hold the WetMaxx squeegee blade securely in their center, and the ergonomic handle is equipped with a non-slip, skin-friendly material. The tilt angle of the squeegee blade is continuously adjustable. To do this, simply loosen the holding screws, adjust the angle and then re-tighten the screws. To protect the film material from scratches, we have covered the lower holding plate with our proven microfibre fabric. This patch is pre-assembled and can be reordered individually. Versatile & customizable squeegee for different uses Depending on the job, WetMaxx can be quickly modified, for example by replacing the squeegee blade or mounting the additional handle for more contact pressure. WetMaxx is a tool with lots of potential uses and can easily replace many other application tools in your tool bag! All components of the WetMaxx squeegee system are available individually: From the squeegee blade to the handle to the extra grip handle, you can assemble your WetMaxx individually. As a standard recommendation, we offer the handle together with the different squeegee blades in pairs. The system can also be ordered as an All-in set: With this you get all individual parts in a complete package to be directly prepared for all requirements ;-) Product features Heavy duty squeegee system for wet applications on glass surfaces Two degrees of hardness available: 90° and 95° Shore Three shape variants: 130mm rectangle / 130mm trapezoid / 160mm trapezoid Squeegee blade dimensions (W x L x H): 130 x 50 x 6mm / 5" x 2" x .23" (S / T / TH 130) resp. 160 x 50 x 6mm / 6.3" x 2" x .23" (T / TH 160) Ergonomic, non-slip aluminum handle Length of handle: 150mm / 5.9" Infinitely adjustable angle of inclination Microfiber cover for scratch-free application Additional handle for more contact pressure during application Notes about configuration A correspondingly wider clamping plate (SparePlate 160) is required for mounting the 160 mm wide squeegee blades. This can also be ordered separately; the standard SparePlate 130 clamping plate is also available separately. When using the additional grip handle (Grip), the standard screws (Allen short) are exchanged for longer ones (Allen long). The screws are delivered with the handle, along with a matching Allen key. Both sets of screws can also be ordered separately.
