White Wall Mounted Loft Wall Ladder This loft ladder is made of high-quality Mg-Al Alloy with wear and rust resistance characteristics, more durable than ordinary steel. The special S-shaped strings adopted by the attic access ladder enhance the bearing capacity, up to 660 lbs. Attention Before you purchase it, please clearly confirm SIZE of the product. The color is White. DO NOT stand under the ladder when you install it. DO NOT over load bearing capacity. Complimentary with 2 spare steps. Parameter Color White Height 2.5m/8.2 ft Material Aluminum-Magnesium Alloy Step 10 Step Size 40 x 14 cm / 15.7 x 5.5 in. Weight Capacity 660 lb Matters needing attention: 1.Please install the fixed frame according to the height on our website. If the installation height is not appropriate, please contact us to solve the problem! 2.When pulling down the ladder, do not stretch it backward too much. Just put it on the ground naturally. Excessive stretching will cause uneven stress and may cause tilting. If you are not sure about the stretching position, you can take photos to contact us! 3.If it is used for several months or frequently, you can check whether the screws are loose as a routine maintenance of the stairs. 4.If there is a fault during use, please contact us first, and do not repair it yourself to prevent improper maintenance! Maintenance Information Users are responsible for the proper operation and maintenance of the equipment they use. Some equipment will quickly become damaged and unsafe if abused or subjected to improper demands. If equipment is regularly maintained and not abused, you will get the maximum safety and service performance from loft wall ladder stairs. Do not overload ladder stairs. Do not knock it vigorously. Do not disassemble it casually. Do not open the tripod forcibly. Do not play movement on ladder stairs. These uses create severe impact and shock loads that may lead to steps and equipment failure. Operation Demo a) Position the ladder by lifting to the wall where it has to installed and mark the holes for drilling location. b) Drill holes on the concrete block in line with the hole marking location. c) Clean the holes free from debris and other foreign particles after the drilling procedure using an air gun or any similar equipment. d) After marking place the ladder in a safe ground position. Item Include(022224) White loft wall ladder stairs*1 Additional Steps*2 Manual*1 Pull rod*1
