A symbol of Death School spirit! The Wizard101 Death School Symbol Embroidered Patch is perfect for wizards willing to be pronounce their school to the rest of the world! This circular embroidered patch is 3" in diameter and features the school symbol of one of the following: • 26% cotton, 74% polyester• 3″ (7.6 cm) in diameter• Attachment options: iron-on, sew-on, or safety pinThis Official Wizard101 product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions! Instructions Please ensure you are careful with any heating device. Follow these steps when attaching patches by iron-on backing: Choose the item on which you plan to attach the patch. As a general rule, the fabric you choose should be at least as heavy as the patch. Fabrics like denim and cotton provide the best base for iron-on patches. Lay your item on a flat, heat-resistant surface. Heat up the iron to the hottest setting your fabric can tolerate. Make sure the "steam" option is turned off. Iron the place where you plan to place the patch. Place a thin garment over the patch. Position the heated iron over the garment that you placed over the patch and press down firmly for about 25 seconds on each side. Remove the iron and allow the patch to cool. Check to see whether the patch is fixed on securely by gently rubbing at the edge with a finger. If it lifts up a bit, repeat the process. For a completely secure patch, use a sewing machine or a needle and thread to secure the patch to the fabric. Full adhesiveness will be achieved in 48 hours. Disclaimer: Don’t wash the item more than necessary since this process may cause the patch to start coming off. If you do need to wash the item, hand wash it using cold water. Allow it to air dry.
