Wizards Turbo Cut Time Release Compound Fast cut on dead paint, gelcoat and fiberglass. Removes 1200 grit or finer sand scratches. High gloss finishing on fresh or aged, single stage paint and clear coat. No wax, silicone or crystalline silica. Non-greasy, water-based for easy clean up without staining. Marine use: Exterior defect removal on gelcoat or neglected fiberglass. WIZARDS TURBO CUT will quickly and easily remove 1200 grit and finer sand scratches from fresh, aged, single stage and clear coat finishes. Turbo Cut quickly restores dead paint, fiberglass and gelcoat, leveling to an impressive gloss HOW TO USE: Starting with a clean, cool surface, apply Turbo Cut generously, slowly buff/spread in a 2'x2' area. Then increase to run rotary buffer at 1400-2200 RPM. For the best cut to remove scratches without hazing, use a blended wool pad and avoid fast back and forth buffing. Continue with Finish Cut or Mystic Cut using a foam cutting pad. Finish by buffing with a finishing pad at 1000 RPM. Detail finish to a super gloss with a high-quality detail spray.
