Wolfgang Total Swirl Remover 3.0 by Menzerna is an all-in-one swirl remover that finishes like a polish. Remove 2000 grit sanding scratches, oxidation, and swirls - all with one polish. Wolfgang Total Swirl Remover 3.0 is made by Menzerna of Germany to Wolfgang’s specifications. It meets all their criteria for a perfect polish and we guarantee it will exceed your expectations. Wolfgang Total Swirl Remover 3.0 is a feat of modern surface science. Developed by Menzerna for Wolfgang, Wolfgang Total Swirl Remover 3.0 is an aggressive swirl remover with the gentle touch of a shine-enhancing polish. It’s not an oxymoron – it’s a unique breed of abrasives that level paint without scratching. Wolfgang Total Swirl Remover 3.0 starts improving the paint immediately and leaves the paint noticeably smoother and shinier, even before the finishing polish is applied. Wolfgang Total Swirl Remover 3.0 is a hybrid of Wolfgang’s original Total Swirl Remover formula and Menzerna’s fast-cutting polish for ceramic clear coats. It combines Wolfgang’s diminishing abrasive technology with Menzerna’s special milling process, which produces consistently sized, fast cutting abrasives. Most heavy-cut swirl removers work by levelling the edges of scratches with large abrasives. The large scratches are replaced with smaller scratches caused by the abrasives. The next swirl remover will have smaller abrasives to remove these scratches. After that, you’ll need a finishing polish. Features of Wolfgang Total Swirl Remover 3.0 - Made by Menzerna - Diminishing Abrasive Technology - Milled and processed by Menzerna - Low-dusting, easy clean-up - Water-based - No fillers, wax or silicones - Removes 2000 grit sanding scratches - Effective on conventional and ceramic clear coats Wolfgang Total Swirl Remover 3.0 takes a direct route to a perfect finish. The specially milled abrasives, developed by Menzerna of Germany, work to eliminate imperfections without creating new ones. These small abrasives are milled for consistency. As they smooth over a scratch, the abrasives diminish at the same rate because they all started at the same size. The result is smooth paint in fewer steps. If another step is needed to fully restore the gloss, simply switch to a softer foam pad. Wolfgang Total Swirl Remover 3.0 works more or less aggressively based on your pad selection. If you need aggressive swirl and oxidation removal, use a cutting or light cutting pad. If you need minor swirl removal, use a polishing pad. Wolfgang Total Swirl Remover 3.0 works with your pad of choice to give you the best results. Wolfgang Total Swirl Remover 3.0 works on all types of paint, including today’s ceramic clear coats. This type of paint is much harder than a conventional clear coat, which can make it tough to correct. Wolfgang Total Swirl Remover 3.0 delivers excellent results on scratch-resistant clear coats. A high concentration of German abrasives, combined with Wolfgang’s lubricant-rich formula, provide Wolfgang Total Swirl Remover 3.0 with excellent levelling ability. All types of paint can be successfully and flawlessly corrected with Wolfgang Total Swirl Remover 3.0. Wolfgang Total Swirl Remover 3.0 can be applied with a dual action or a rotary (circular) polisher. The polish will cut quickly when applied with a rotary polisher, which makes it easier to correct hard, ceramic clear coats. However, there is enough lubrication to afford Wolfgang Total Swirl Remover 3.0 a longer working time with a dual action polisher. This versatility makes Wolfgang Total Swirl Remover 3.0 an ideal choice for detailers of all skill levels. One polish can do it all. Wolfgang Total Swirl Remover 3.0 cuts like a light duty compound but finishes like a polish. Remove 2000 grit scratches, oxidation, and swirls on any type of paint, and leave a smooth, wax-ready finish. Size: 16 oz (473 ml
