Cut. Restore. Repeat. Heavy oxidation isn't a polish problem — it's a cut problem. Wraith Pad is the heavy-cut polishing pad built to load Extremo at full strength and remove what lighter pads can't touch: 800-grit sanding scratches, deep swirls, water-spot etching, and the gray haze that comes from years of UV neglect. Dense closed-cell foam holds compound across the entire face so cut stays consistent through the pass; Velcro hook-and-loop backing locks to standard 5" plates with no slip under sustained rotational load. The pad that turns dead gel coat back into glass. Key Features: Heavy cut performance — engineered to run Extremo at full strength Dense closed-cell foam holds compound evenly without breaking down mid-pass Velcro hook-and-loop backing — fast swaps, no slip Built for marine gel coat, automotive paint, and RV restoration The step-one pad in a Wraith → Leveling → Refine sequence Engineered for detailers Made in the USA How to Use: Load 10-20 pea-sized drops of Extremo onto the Wraith Pad. Run a rotary or DA polisher in 2x2 ft sections, starting at low RPMs and increasing as defects break down. Use moderate-to-firm pressure. Wipe residue with a clean microfiber and follow with the Leveling Pad + Ultima or the Refine Pad + Prime X to refine. Best paired with Extremo.
