Brand: Hunter Industries SKU: WRFCLIK Product Overview The Hunter WRF-CLIK is a wireless Rain/Freeze-Clik system that includes an outdoor rain-and-freeze transmitter plus a controller-mounted receiver. It is designed to interrupt automatic irrigation when rainfall begins and to keep the system from operating at or below approximately 37°F. The wireless connection eliminates the need to route a sensor cable from the outdoor mounting point back to the irrigation controller. Hunter’s current installation instructions recommend locating the transmitter within approximately 200 feet of the receiver with the clearest practical signal path. Complete kits are factory paired, while replacement components can be re-addressed in the field. The receiver provides wet/dry status indicators and a bypass button for supported installations. The sealed transmitter uses a maintenance-free battery designed for up to approximately five years of daily operation. Quick Response technology can stop irrigation within about two to five minutes after rainfall begins. The rain-sensing portion resumes normal operation as the moisture-responsive components dry, while the freeze function is preset and does not require adjustment. Key Features Wireless rain-and-freeze sensor and receiver kit Quick Response rain shutoff in approximately two to five minutes Freeze shutoff at or below approximately 37°F Recommended wireless range up to approximately 200 feet Sealed maintenance-free transmitter battery rated up to approximately five years Receiver wet/dry status indicators Receiver bypass button Adjustable vent ring for rain-sensor drying rate Supports compatible normally closed or normally open sensor inputs Common Uses Preventing irrigation during rainfall Reducing sprinkler operation near freezing conditions Retrofit installations where running a sensor cable is impractical Residential and commercial irrigation controllers Compatibility and Installation Notes The receiver is designed for compatible 24 VAC irrigation-controller circuits only. Mount the sensor where it receives natural rainfall but not sprinkler spray. For accurate freeze sensing, position the transmitter out of direct sunlight with free outdoor airflow. Keep the sensor within approximately 200 feet of the receiver and test the signal before permanent mounting. Metal structures, walls, electrical equipment, and site conditions can reduce wireless range. The freeze function supplements, but does not replace, visual checks and responsible winter irrigation management. Frequently Asked Questions Does WRFCLIK include both the transmitter and receiver? Yes. This product is the complete wireless rain-and-freeze sensor system. At what temperature does it interrupt irrigation? The freeze sensor is designed to disable irrigation at or below approximately 37°F. How far can the transmitter be from the receiver? Hunter’s current installation card recommends up to approximately 200 feet, subject to structures, terrain, and radio conditions. Why Buy from Big Frog Supply? Big Frog Supply carries Hunter wireless rain-and-freeze systems, rain sensors, controller accessories, gutter mounts, and irrigation repair components.
Related
Related
Related
Related