HiTEC X4AC PRO: 4-channel 200 Watt AC / 300 Watt DC programmable professional charger & analyzer. Has 4 independent channels. For Li-ION, Li-PO, Li-FE, Ni-Cd, Ni-MH, PB. Quickly & safely charge up to 4 battery packs at the same time! Loaded with accessories. Note: This item has been discontinued by HiTEC; Limited Qty available. It has now been replaced by the HiTEC RDX4, which is in stock. PRODUCT OVERVIEW: The HiTEC X4 AC Pro AC/DC Four Port Multi-Charger for NiMH, NiCd, LiPo, LiFe, Lilon, LiHV, and Pb/Lead Acid batteries. It will charge 1-6S lithium, 1-15 cell NiMH/NiCd, and 2-20V Lead Acid batteries it capacities of 100-50,000mAh. The charger includes a universal balancing board, an XH-type balancing board, XT60 charge cable, Deans/T-type charge cable, two charge cables with bare wires (no connectors), receiver battery charge cable, DC power cord, AC power cord, and instruction manual.Building on the popularity of our X4 AC Plus, we decided to take it up a notch with the introduction of our X4 AC Pro high-performance, microprocessor-controlled charger/discharger with extensive battery management capabilities. Capable of operating on 100-240 volts AC household current or from an 11-18 volts DC power source, this new multi-faceted powerhouse exudes a total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output when in DC mode. The X4 AC Pro allows you to connect up to four batteries of varying chemistries (NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb) to any of the charging channels with each channel performing independently of one another. Additional features include our "Charge Master" software, providing the unprecedented ability to operate your charger via your personal computer plus a built-in Bluetooth for Smartphone app operation. Experience the future of charging with Hitec! FEATURES Charges the following battery types 1-6 cell LiPo, LiHV, LiFe and LiIon 1-15 cell NiMH, NiCd 2-20V Lead Acid batteries Built-in Bluetooth Smart 4.0 for smart phone control with available iOS and Android apps Total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output in DC mode Charges or discharges up to four batteries with different chemistries at once Built-in balancing ports Ten battery memories per channel Charge Master software allows charger operation via personal computer Cooling fan One year limited warranty through Hitec beginning at date of purchase INCLUDES Hitec X4 Pro ChargerUniversal Balancing BoardXH-Type Balancing BoardXT60 Charge CableDeans/T-type Charge CablesTwo Charge Cables with bare wires (no connectors)Receiver Battery Charge CableDC Power CordAC Power CordInstruction Manual SPECIFICATIONS AC Input: 100 - 240 Volts ACDC Input: 11 - 18 Volts DCTotal Charge Circuit Power on AC Power: 200W w/Power DistributionAC Power Distribution:Channels A & C: 100 Watts TotalChannels B & C: 100 Watts TotalPower Distribution Adjustable Range:Channels A & B: 50 - 100 WattsChannels C & D: 0 - 50 WattsTotal Charge Circuit Power on DC Power:300 Watts Total PowerChannels A & B: 100 Watts each / Channels C & D 50 Watts eachCharge Current:Channels A & B: 0.1 - 10.0 AmpsChannels C & D: 0.1 - 5.0 AmpsDischarge Wattage: 10 Watts per ChannelDischarge Current: 0.1 - 2.0 Amps per ChannelDischarge Current for Lithium Battery Balance: 200mAhBattery Capacity Range: 100 - 50,000mAhAuxillary Output: 5 Volt 2.1 Amp DC USB Device Charge PortCommunication Methods;USB Port for PC Control & Firmware UpgradesBluetooth 4.0 for Smartphone AppsDimensions: 3.8 x 7.2 x 2.8" (97 x 182 x 71mm)Weight: 47oz (1335g)
Related
Related
Related
Related