CTA-2006-D Value Maximum Dynamic Power 65W x4 + 350W x1 at 4ohms and ≤ 10% THD + N Continuous Power Output 50W + 300W at 4ohms and ≤ 1% THD + N Signal to Noise 77dBA x4 80dBA x1 reference 1 Watt RMS Maximum Power Output MAX POWER 1600W Rated Power Output at 14.4V A/B (4 Ohms) 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD) A/B (2 Ohms) 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD) SUB (4 Ohms) 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤1.0% THD) Other Channel SUB (2 Ohms) 500Watts RMS x 1 (2 Ohms, 100Hz, ≤1.0% THD) Other Channel A/B (Bridged 4Ohms) 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD) Specifications Signal to Noise Ratio 90dB (Reference: Rated Power into 4Ohms at 14.4V) Frequency Response 20Hz-50kHz (+0dB, -3dB) A/B Frequency Response 20Hz- (+0dB, -3dB) SUBch (Upper Feqency is depended on Low Pass Filter) Frequency Response 20Hz-40kHz (+0dB, -1dB) A/B Input Impedance 10k ohm Speaker Impedance 4Ω (2Ω to 8Ω allowable) Bridged Connection 4Ω to 8Ω allowable Audio Section Low-Pass Filter Sub Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct) High-Pass Filter A/B High-Pass Filter Built in Variable High-Pass Filter (50Hz-200Hz, -12dB/oct) Bass Boost Sub Built in Bass Boost Control (40Hz, 0dB-18dB) Infrasonic Filter - RCA Input Sensitivity 0.2[V] - 5.0 [V] Speaker Level Input Sensitivity 4.0[V] - 12.0 [V] Terminals Battery & Ground Wire Clamp Type Terminal Block(M6,Nickel Colored）,Hexagon Screw,Capable for AWG4-AWG6 Speaker Output Wire Clamp Type Terminal Block(M4,Nickel Colored）,Hexagon Screw,Capable for AWG8-AWG16 General Dimensions(WxHxD) (W)9-3/4" x (H) 2-1/16” x (D)6-5/8” Dimensions(WxHxD) (W) 248mm x (H) 53mm x (D) 169mm Weight 4.6 lbs ( 2.1 kg) Operating Voltage 14.4V（11-16V allowable） Current Consumption 48[A] Key Features Hi-Res AUDIO CompliantCTA-2006-D CompliantClass D2 Ohms Load CapabilityOne-Sided ConnectionSpeaker Level InputSignal Sensing Turn-onRemote Level Control ※Input Sensitivity for SubTerminal Concealing Cover(Resin Mold)Power MOS-FET Switching Power SupplyExtruded Aluminum Heat Sink DesignA B Sub Independent Gain AdjustmentA B AB(Mix) Independent Gain Adjustment
